Updating Quadzilla XZT+
#1
Registered User
Thread Starter
Join Date: Sep 2003
Location: McKinney, TX
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Updating Quadzilla XZT+
I just received the new XZT+ for my 2001 and have been attempting to install updates from the Quadzialla website but must be doing something wrong. Windows is detecting the device and installing it as a USB to Serial Converter but is unable to start the device (Code 10). Device manager shows that the current driver installed for this device is from Quadzilla Inc, 1/3/2007 version 1.0.0.0.
I have attempted the update from a Windows XP machine and a Windows 2003 box with the same results. I have also used multiple USB cables to rule that out. I am sure there is something I am missing but I haven’t figured it out yet.
I have attempted the update from a Windows XP machine and a Windows 2003 box with the same results. I have also used multiple USB cables to rule that out. I am sure there is something I am missing but I haven’t figured it out yet.
#2
Registered User
Join Date: Nov 2006
Location: Lyndhurst, NJ
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
That's what it did with mine. It says the device is working properly, but when I run one of the update programs, it says it can't detect the module and asks me to retry over and over.
Guess I'll have to call on Monday.
#3
I had the same problem and worked with them on it. Turned out all I had to do was hit update module and plug and unplug it a couple times until the flasher finally recognized the module. Worked fine since then but it was a pain the first time for some reason. I had the same code 10 error--which is only a time out error. The driver and eveything should still be installed just fine. I was told if you hit update module it looks for the module for 20 seconds until it times out. If you just try to retrieve info it only looks for 5 seconds or something like that.
#4
Registered User
Join Date: Feb 2006
Location: NW Arkansas
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
GFB is right. Try to run the program and wait until the update screen says "searching for module" and then plug the usb cable into the module. Sometimes when I run the update with the module already plugged in it wouldn't find it.
Thread
Thread Starter
Forum
Replies
Last Post
sCreamin400
3rd Gen High Performance and Accessories (5.9L Only)
1
11-02-2008 01:46 PM
Batts
3rd Gen High Performance and Accessories (5.9L Only)
20
09-12-2005 07:39 PM
wdbates
3rd Gen High Performance and Accessories (5.9L Only)
38
08-10-2005 07:59 AM
MikeyB
3rd Gen High Performance and Accessories (5.9L Only)
3
04-20-2005 01:24 PM
onesourceoil
3rd Gen High Performance and Accessories (5.9L Only)
28
04-08-2005 08:13 PM