U-joints??
#1
U-joints??
I let a buddy borrow my W350 to pull a heavy load (16ft. trailer w/lumber). When I drove it last it had a shudder at about 70-75mph. Seems like a u- joint issue. Is there any way to diagnose for sure without throwing parts at it? Could it be something other than a u-joint?
Thanks in advance.
sTw
Thanks in advance.
sTw
#3
Registered User
Drive it around for a while then feel them. If they are burning to the touch, replace them. Mine I just did. Had a shudder between 20-35, did the above method. I started at the rear and moved forward. The rear shoulda been glowing red, it was that hot. The second was not much better. The front one felt like ice compared to the rear 2. When I changed them out, I had 2 caps with dust in them in the rear one and the middle one had only one that grenaded. The biggest roller bearing part was probably 1/32" big
HTH
Jon
HTH
Jon
Thread
Thread Starter
Forum
Replies
Last Post
kprc51
3rd Gen Engine and Drivetrain -> 2003-2007
4
06-14-2007 06:27 AM
njmaier
3rd Gen Engine and Drivetrain -> 2003-2007
15
07-26-2006 07:43 AM
Seeder
3rd Gen Engine and Drivetrain -> 2003-2007
2
02-15-2006 08:15 PM