two dial indicator mounts i made w/(6 pics)
#1
Registered User
Thread Starter
Join Date: Jan 2005
Location: fort smith arkansas
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
two dial indicator mounts i made w/(6 pics)
i made a P7100 distribution valve mount from a 95 dodge drain valve.
also made a mount to set in place of the # 1 injector to measure TDC.
this one uses a spare M24 x 1.5 pitch injector nut.
I made these for my 95 they ought to work on most 2nd gens 12 valves
maybe some one can use or expand on these for their own use.
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
also made a mount to set in place of the # 1 injector to measure TDC.
this one uses a spare M24 x 1.5 pitch injector nut.
I made these for my 95 they ought to work on most 2nd gens 12 valves
maybe some one can use or expand on these for their own use.
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
got...DIESEL?
Performance and Accessories 2nd gen only
5
12-17-2005 01:12 PM