Twins AND a missing sound
01-20-2008, 01:45 PM
#1
Registered User
Thread Starter
Join Date: Oct 2007
Location: hilltown,pa
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Twins AND a missing sound
When i look at the kits for twins they always say the heat/cooler on the block is removed my question is what do you do with the lines going to it?
Also when i go to get on it in the morning after i let i warm up, it pops and won't rev up and acts like its running on 2 cyclinders but once i get it to boost it gets better, but even when its warm and been running for a while it will do it occasionally?
Also when i go to get on it in the morning after i let i warm up, it pops and won't rev up and acts like its running on 2 cyclinders but once i get it to boost it gets better, but even when its warm and been running for a while it will do it occasionally?
01-20-2008, 02:01 PM
#2
Registered User
Join Date: Jan 2008
Location: IN
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
plug the water lines to the heater/ cooler make sure the one going to the heater core still goes there then on the trans just run a line to the cooler in the frount . just watch the trans temps in town towing if its to high put a elec fan on the outside of the cooler on the frount flip it on when it gets hot
Thread
Thread Starter
Forum
Replies
Last Post
dodgediesel
3rd Gen High Performance and Accessories (5.9L Only)
17
04-05-2011 11:21 AM
Stock 02
Performance and Accessories 2nd gen only
28
09-24-2006 11:09 AM