Performance and Accessories 2nd gen only Talk about Dodge/Cummins aftermarket products for second generation trucks here. Can include high-performance mods, or general accessories.

Twin Turbos are on!!

Old 04-12-2009, 12:37 PM
  #1  
Registered User
Thread Starter
 
CapnRam's Avatar
 
Join Date: Jan 2005
Location: Montana
Posts: 409
Likes: 0
Received 0 Likes on 0 Posts
Twin Turbos are on!!

I just installed the BD towing twins, its like night and day compared to the II SPS 62 i had, instant spool up, power band all the way to 4k, EGT's.. yea dont even watch them anymore! Had 700 miles on the setup and left for WA, put the smarty on fuel/boost and the ADR on 1, cruise set to 77 (2100rpm) and got 17.7 mpg ( and thats hand calculated)! Now this was with the RV275's, yesterday i put in some 150's so we'll see what happens next weekend when i head back home. Awesome set up! I'm going up to BD next weekend for the dyno day, so i'll post some #'s then. Heres a couple of pics of it... what do ya think? My brother and I do powerdercoating, so anything i could get in the oven got coated.. thanks for all the info i got before i tackled this job!!
Capn

Old 04-12-2009, 12:46 PM
  #2  
Registered User
 
HidalgoGT's Avatar
 
Join Date: Apr 2009
Posts: 63
Likes: 0
Received 0 Likes on 0 Posts
Looks SWEET!!
Old 04-12-2009, 02:06 PM
  #3  
Registered User
 
gwhammy's Avatar
 
Join Date: Dec 2003
Location: NE,Missouri
Posts: 733
Likes: 0
Received 0 Likes on 0 Posts
Twins can't be beat in my opinion. What else do you do besides add stuff to your truck? Can't be any extra time left.
Old 04-12-2009, 03:22 PM
  #4  
The Guru
 
Mike Holmen's Avatar
 
Join Date: Jan 2004
Location: Airdrie Canada
Posts: 6,589
Likes: 0
Received 0 Likes on 0 Posts
Nice truck buddy. The BD show is lots of fun. You gonna run the dyno? I haven't been to one in a few years.
Old 04-12-2009, 03:26 PM
  #5  
Registered User
Thread Starter
 
CapnRam's Avatar
 
Join Date: Jan 2005
Location: Montana
Posts: 409
Likes: 0
Received 0 Likes on 0 Posts
I am going to run on the dyno, not forsure if the OFE will hold up,, i have already slipped it, but i was pretty hard on it.. full power shift, with the twins it doesnt drop the boost as bad as a single! After the dyno run i'll be heading back to MT..
Old 04-12-2009, 03:35 PM
  #6  
The Guru
 
Mike Holmen's Avatar
 
Join Date: Jan 2004
Location: Airdrie Canada
Posts: 6,589
Likes: 0
Received 0 Likes on 0 Posts
Baby it down there and get one installed. Lots of good diesel repair shops in that area around Surrey/Abbotsford area. Good luck at the show.
Old 04-12-2009, 06:48 PM
  #7  
Registered User
Thread Starter
 
CapnRam's Avatar
 
Join Date: Jan 2005
Location: Montana
Posts: 409
Likes: 0
Received 0 Likes on 0 Posts
already talked to Peter at SB, 3200lb double disk and HD input shaft for the nv4500 is on the way.. project when i get home!

Capn
Old 04-12-2009, 07:01 PM
  #8  
Registered User
 
Dinner's Avatar
 
Join Date: Jun 2006
Location: Thamesford, Ontario Canada
Posts: 1,288
Likes: 0
Received 0 Likes on 0 Posts
Those look sweet, great job on the PCing! Truck looks pretty neat as well.

Do you have any videos of how the BD's spool, boost,etc?
Old 04-12-2009, 08:58 PM
  #9  
Registered User
Thread Starter
 
CapnRam's Avatar
 
Join Date: Jan 2005
Location: Montana
Posts: 409
Likes: 0
Received 0 Likes on 0 Posts
havent done any videos yet, those are comin later..
Old 04-12-2009, 09:45 PM
  #10  
Registered User
 
graphitecumnz's Avatar
 
Join Date: Mar 2004
Location: Wichita, Kansas
Posts: 1,385
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Dinner
Do you have any videos of how the BD's spool, boost,etc?
I'll spare you the vids and tell you they spool wicked fast...
Old 04-12-2009, 11:39 PM
  #11  
Registered User
Thread Starter
 
CapnRam's Avatar
 
Join Date: Jan 2005
Location: Montana
Posts: 409
Likes: 0
Received 0 Likes on 0 Posts
For what i had on here, the II sfs 62.. yea these are wicked fast... i just cranked the adr up to 10 with the new 150 sticks and holy #$%^.. broke the tires loose at 45.. couldnt even tell how much boost i was makin.. this thing is sick.. i'm going to bd next weekend for there dyno days so we'll see what happens for numbers..?? thanks
Capn
Old 04-13-2009, 07:58 AM
  #12  
Registered User
 
JohnBer's Avatar
 
Join Date: Dec 2008
Location: Lynden WA
Posts: 190
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by CapnRam
i'm going to bd next weekend for there dyno days so we'll see what happens for numbers..?? thanks
Capn
Ill be up there too, not far from me bout 30 minutes if the crossing ain't all jammed up. See ya there!
Old 04-13-2009, 09:15 AM
  #13  
Registered User
 
RowJ's Avatar
 
Join Date: Apr 2004
Location: Texas/Oklahoma Border
Posts: 8,234
Likes: 0
Received 1 Like on 1 Post
Originally Posted by CapnRam
For what i had on here, the II sfs 62.. yea these are wicked fast... i just cranked the adr up to 10 with the new 150 sticks and holy #$%^.. broke the tires loose at 45.. couldnt even tell how much boost i was makin..
FYI-
I'm running Mach 4's now, and with Smarty on #3 and Adrenaline on 10 (with no timing), I can make 60 psi boost!
You may want some H20/Meth if racing. It will hold EGT's down a bit and add 50 hp.
Never mind....just read your signature closely
My EGT's get into the red for the last 3-5 sec of a 1/4 mile run, and top out around 1500* even with the H2O/Meth.

Nice Graphics!

RJ
Old 04-13-2009, 09:19 AM
  #14  
Registered User
 
lvmknsmoke..'s Avatar
 
Join Date: Sep 2008
Location: Latham, Missouri and now Goshen, Indiana
Posts: 311
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by CapnRam
For what i had on here, the II sfs 62.. yea these are wicked fast... i just cranked the adr up to 10 with the new 150 sticks and holy #$%^.. broke the tires loose at 45.. couldnt even tell how much boost i was makin.. this thing is sick.. i'm going to bd next weekend for there dyno days so we'll see what happens for numbers..?? thanks
Capn
now thas wat im talkin about!! very nice setup!! hopin to do the same in the future..
Old 04-13-2009, 09:46 AM
  #15  
Chapter President
 
Mike D's Avatar
 
Join Date: Nov 2003
Location: Rural Hall, NC
Posts: 3,807
Likes: 0
Received 0 Likes on 0 Posts
I want to see video of the tires breaking loose at 45mph!

Thread Tools
Search this Thread
Quick Reply: Twin Turbos are on!!



All times are GMT -5. The time now is 09:44 AM.