clowndodge01

Based on my current mods what turbo upgrade do any of you recommend, yes I searched but nothing with my setup poped up. I do plan on upgrading injectors and tranny (when it breaks) but I am looking at the turbo 1st?? what do you all think???

busa

I can only rec. what I know but my H.T.T. Super Stock 62 is very nice. Get yourself some bigger injectors and you will be smiling.

clowndodge01

where's a good place to buy them??

busa

They are all over, many shops sell them. I bought mine from High Tech Turbo themselves but after I saw them for cheaper elsewear

afoulk

If you go with a bigger set of injectors, I'd go with a set of 150hp stix. You cant go wrong with F1 Mach 4's or DDP's 150hp injectors. As for the turbo, either an Industrial Injection SPS 62/14, or HTT 62/14 if you go with the bigger sticks. However, at that level, I would definately consider head studs and either o-rings or a cometic gasket.

clowndodge01

thanks for the input guys im deffinatly gonna find the right place on the net to buy this stuff cheaper than the actual companies sell them for

JFlory

I have a simular truck, with the mach 4's, which I might add are good enough to start whole other thread about.
I was looking for around 500-550hp, and do some towing. I went with a HTT SS 64/71/13.
Spool up is just a tiny bit lagy, but I also am NOT running any tuning until I can get a Quad A. I did have a Smarty and a 140hp box on it for a long while and it spooled great. I could clean up every bit of smoke.
The 64 is more than likly bigger than most run, but I don't want smoke.
A 62 would be perfect. I went with HTT, because of the SS and 13 snail. There are several good 62's on the market from many companys.

wurkenman

I'm happy with the BD. You will need a trans.

clowndodge01

I love this web site!!