what turbo?
07-14-2009, 10:37 AM
#1
Registered User
Thread Starter
Join Date: Feb 2007
Location: BC, Canada
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
what turbo?
i did a search and found way to many results on turbos so i figured i would post up and see what you guys think is my best bet. I have a 2001 2500 with 80hp injectors, DTT trans, edge juice with attitude, afe intake, intake manifold, bd flowmax lift pump. what turbo would be the best set up for my truck? the turbo is holding me back right now as its stock. also the best place to pick one up would be great too.thanks
07-15-2009, 01:11 AM
#2
Registered User
Join Date: Dec 2003
Location: Garrard county, Kentucky
Posts: 3,077
Likes: 0
Received 0 Likes
on
0 Posts
I would think a 62/65/14 would be a pretty good turbo for you. It should spool pretty darn good and flow a lot better on the top end.
You have the HY35, so you will definately love a bigger turbo. It will run much better on the top end. Even with my HX40, my truck runs a decent bit better on the top side from the better exhaust flow.
Eric
You have the HY35, so you will definately love a bigger turbo. It will run much better on the top end. Even with my HX40, my truck runs a decent bit better on the top side from the better exhaust flow.
Eric
07-15-2009, 10:54 AM
#4
Registered User
Join Date: Dec 2003
Location: Garrard county, Kentucky
Posts: 3,077
Likes: 0
Received 0 Likes
on
0 Posts
Almost any place that sells Schwitzer turbo's for our trucks.
Engineered diesel is a great place to get one. Call them up and get a price from them. They seem to be a little better priced than a lot of the other places, and they have great customer service.
http://www.engineereddiesel.com/
Eric
Engineered diesel is a great place to get one. Call them up and get a price from them. They seem to be a little better priced than a lot of the other places, and they have great customer service.
http://www.engineereddiesel.com/
Eric
07-15-2009, 11:27 PM
#5
Registered User
Join Date: Apr 2007
Location: SLC, Ut. 4,200 ft.
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
Redneck is it turbo buyin time for ya?! Im jealous!
I also say a 62/65/14 or 12 would be a great size. Im planning on that size from industrial injection.
Ive been kinda considering a 62/65/13 from HTT also.
Enginered diesel is a name thats comin up alot lately, I hear they have a bit better prices as well.
I like the phat shaft series from II cause they are local to me and I have alot friends runnin em here and lovin em.
I also say a 62/65/14 or 12 would be a great size. Im planning on that size from industrial injection.
Ive been kinda considering a 62/65/13 from HTT also.
Enginered diesel is a name thats comin up alot lately, I hear they have a bit better prices as well.
I like the phat shaft series from II cause they are local to me and I have alot friends runnin em here and lovin em.
07-16-2009, 05:04 AM
#7
Registered User
Join Date: Mar 2002
Location: The Great Northwest!
Posts: 1,276
Likes: 0
Received 0 Likes
on
0 Posts
A 62mm sized charger makes sense. A 62/65-13ss would be a great top turbo for a set of compounds down the road.
If you are never, ever going that route, look at a 62/71-13ss
Dave
If you are never, ever going that route, look at a 62/71-13ss
Dave
Thread
Thread Starter
Forum
Replies
Last Post
j
Performance and Accessories 2nd gen only
5
01-09-2004 08:19 AM
Haulin_in_Dixie
Performance and Accessories 2nd gen only
12
07-21-2003 11:14 AM
redram
Performance and Accessories 2nd gen only
9
12-10-2002 09:54 AM
