ct2500

hey guys wanting to upgrade my turbo and was lookin at some would i be able to run any of these a singles for sled pullin? would atapter plate be needed. HX50, HX55, HT3B, BHT3C. thanks Scott

dieselrob

The 50 or 55 would be easiest but it depends what exhaust hosing is on them. But i dont think you have enough fuel to efectively run one. You would be better off with a 64mm htt or ii turbo.

ct2500

how many differnt housing options did they have? would like to get a 64 but cant afford it.my 62 wont clean up the injectors i have now. i herd that any injector over a 150 is pointless on a HO pump.

dieselrob

Im not shure on the number of different housings, but those turbos were originally on bigger engines, more cubic inches so they have bigger exhaust housings. Where are you getting the turbo from? Can you get part or serial numbers on them if they arent from a performance shop. If its from a shop selling them for our trucks specificly then it will have a smaller housing. If you tow at all none of them will be a good choice unless your switching it just for sled pulls. What can you get one for and what is your buget?