Truck wont crank over with key but will with rigged up switch
#1
Truck wont crank over with key but will with rigged up switch
My truck wont crank over with the key.Someone has rigged in a push button.They cut the white wire on the fuel shutoff solenoid and ran a new wire .What should I replace to get this thing fixed right.My solenoid has to be lifted also to get it in run position.It shuts off ok.thanx
#3
Registered User
Join Date: Nov 2005
Location: Land of milk and honey.
Posts: 1,971
Likes: 0
Received 1 Like
on
1 Post
sounds like the solenoid "pull" was down probably from a bad relay or a corroded wire. Somebody hacked something. check to see where the wire they spliced into the white wire connects.
#4
I hooked the large white wire back together like it was from factory.It is one of the 3 wires in the oval plug that goes to the solenoid.I have 12 volts to the relay on the fire wall.
Thread
Thread Starter
Forum
Replies
Last Post
txhawg
4th Gen Ram -Non Drivetrain- 2010 and Up
18
07-17-2011 02:46 PM
12valve@heart
1st Gen. Ram - All Topics
9
09-08-2006 06:06 PM