dodgeman5902

Hey Everyone,
Yesterday I was hooking up my utility trailer and had truck running.
When I got into the truck to align it up, it stalled. It was like I had released
the clutch too quickly and choked it down. Now all it does is turn over and will not start up. Has anyone ever had this problem or any ideas what it might be?


Thanks

mini14

Bad fca, bad rail pressure relief valve, leaking injector(s), bad cp3, low fuel pressure.

1 or more could be the cauz u have to start narrowing down. id start with checking your fuel pressure.

dodgeman5902

mini14,
Do you need any special tools and are they expensive?

mini14

first check 4 any codes, key on off 3 times, then check your fuel pressure with a guage, if your under 100k u should still be under warranty. remove the module and c if it starts. Then tose the k&n in the garbage and get something better on, or the stock air box.

dodgeman5902

already checked for codes and it passed, no codes

mini14

unplug the module, if it still doesn't start, cap the rail pressure relieve valve at then try to start it. u must check your fuel pressure before doing anything.