12 Valve Engine and Drivetrain Talk about the 12V engine and drivetrain here. This is for 1994-1998.5 engine and drivetrain discussion only.

Transmission "hunting"

Thread Tools
 
Search this Thread
 
Old 05-05-2007, 03:15 AM
  #1  
Chapter President
Thread Starter
 
Rauschbo's Avatar
 
Join Date: Aug 2003
Location: Eagle. ID
Posts: 506
Likes: 0
Received 0 Likes on 0 Posts
Transmission "hunting"

A friend of mine has a '98 / auto with a serious locking in / out issue with the tranny; No particular situation (hot/cold), the tranny jumps in and out of OD all the time.

I recommended doing the APPS reset, and cleaning the battery terminals - no luck; Are there other grounds to clean? Where are they?

Any other ideas? He needs to get his truck back on the road ASAP!

Thx for any advice -

Rauschbo
Old 05-05-2007, 02:40 PM
  #2  
Registered User
 
XLR8R's Avatar
 
Join Date: Nov 2005
Location: Pattonville, Texas
Posts: 7,785
Likes: 0
Received 2 Likes on 2 Posts
You might try shielding the OD solenoid wire - OR/BR on the '98, IIRC

I installed a 3-position switch to control both the TC & OD solenoids at will.
Old 05-05-2007, 02:53 PM
  #3  
Chapter President
Thread Starter
 
Rauschbo's Avatar
 
Join Date: Aug 2003
Location: Eagle. ID
Posts: 506
Likes: 0
Received 0 Likes on 0 Posts
OR / BR = Orange / Brown?

"IIRC"....??

.....how about other sources of noise, alternator, loosened / rusted grounds?

Thx -

Rauschbo
Old 05-05-2007, 03:05 PM
  #4  
Registered User
 
XLR8R's Avatar
 
Join Date: Nov 2005
Location: Pattonville, Texas
Posts: 7,785
Likes: 0
Received 2 Likes on 2 Posts
IIRC = If I Remember Correctly
Old 05-05-2007, 03:08 PM
  #5  
Registered User
 
oaborbag's Avatar
 
Join Date: Oct 2006
Location: Central California
Posts: 353
Likes: 0
Received 1 Like on 1 Post
I'd check all the grounds, mine did the same thing, tightened the battery -'s and the ground wire, hasn't happened since.
Old 05-05-2007, 04:48 PM
  #6  
Registered User
 
kelownadiesel's Avatar
 
Join Date: Mar 2006
Location: kelowna
Posts: 520
Likes: 0
Received 0 Likes on 0 Posts
arent we in the 12v forums?theres no apps is there?Is the tach bouncing around?Mine would go in and out of overdrive on my 97.It was the crank sensor,I took it off ,cleaned it and cleaned around the balancer.Then I regapped it when I installed it again to proper clearance.The truck never worked better.Clean the connectors really good too
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
chadwick
24 Valve Engine and Drivetrain
12
07-17-2009 05:40 PM
PEAKSTRYDE
Suggestions, Comments and Site Questions
1
10-11-2007 04:20 PM
RamToughCowboy
12 Valve Engine and Drivetrain
7
08-25-2007 11:14 AM
xp8103
24 Valve Engine and Drivetrain
13
06-09-2006 05:21 PM



Quick Reply: Transmission "hunting"



All times are GMT -5. The time now is 09:59 PM.