transmision problem
#1
Registered User
Thread Starter
Join Date: Jun 2007
Location: rosebud, texas
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
transmision problem
i have a 1991 3/4 ton 4x4 truck. it currently has an automatic tranny and i was wondering if a getrag out of a 2 wheel drive 1989 truck could be bolted in or if it has to be a 4x4 tranny. would greatly appreciate the help
#4
Registered User
Thread Starter
Join Date: Jun 2007
Location: rosebud, texas
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
i picked up the entire 4x4 for $400. motor has 386000 miles but runs perfect. transmission was overheating like crazy. it seems the canister on the passenger side of the block is a tranny cooler. apparantly it was rusted out so i had a lot of water and a little oil in the tranny. i got that fixed and it shifts first and second good but thats it. took it in for an esimate and was told it could be built much "stouter" than factory with a one year warrant for $1300. i was looking to do a p- pump conversion ($$$$) and basicly run a duallie with 35" the whole way around and make around 450hp.
Thread
Thread Starter
Forum
Replies
Last Post