Transfer Case Capacity
09-16-2005, 07:55 PM
#1
Registered User
Thread Starter
Join Date: Feb 2002
Location: Sturbridge, Taxachusetts
Posts: 1,424
Likes: 0
Received 0 Likes
on
0 Posts
Transfer Case Capacity
Hafta drain the transfer case and replace the fluid. It's wayyy overdue! Does anyone know how much the NV241LD transfer case holds?
09-16-2005, 08:00 PM
#2
Registered User
I replaced mine with Amsoil ATF. I don't recall how much but I believe I bought 4 qts and I think I had some left. Drain it out in a measured pitcher, that will tell you.
09-17-2005, 12:48 PM
#3
Administrator
Originally Posted by Marine
Drain it out in a measured pitcher, that will tell you.
phox
09-17-2005, 07:25 PM
#4
Registered User
Join Date: Jun 2002
Location: Kansas City & Maysville, MO
Posts: 811
Likes: 0
Received 1 Like
on
1 Post
FSM says 4.61 pints of ATF+4, Chrysler spec 9602, and to fill to the bottom of the fill hole. So three quarts should be more than enough. Oh, torque spec on drain and fill plugs is 30-40 ft-lbs., which is a pretty loose torque spec. 
"Tight enough that it doesn't leak" probably would have worked...
"Tight enough that it doesn't leak" probably would have worked...
07-19-2019, 08:35 PM
#6
Registered User
Join Date: Jul 2019
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
NV273D Oil Capacity
Just changed my transfer case oil in a Ram 2500 with NPG/NV 273D and it took 2.75 quarts. Strange the spec is 2 quarts...any thoughts? I've noticed a few other people have experienced this.
Thread
Thread Starter
Forum
Replies
Last Post
rmalone
3rd Gen High Performance and Accessories (5.9L Only)
6
08-21-2008 07:35 PM