cliffs03hd

Where should I plumb this in at. Thanks guys

OOPS

Why do you need one on a manual tranny????

cliffs03hd

It came in the set. If I cant use it I can send it back in and trade it up for a differant guage. any ideas. I have the ISSPRO 100 psi boost, 30 psi fuel, Pyro, and trans temp. Also is it okay to plumb the egt gauge in to the TST probe as well.

Mike_Boutet

I'd be more tempted to put a temp gauge in the rear diff rather than the tranny,especially if towing heavy.

Fred Swanson

Do both, and put a switch on it. The tranny gets hotter than you think. Put a bung on one of the PTO cover plates. No, the gauge and the TST need their own probe.

snapp919

I'm in the same circumstance also, got the guages in a set. Would like to know the best place to install the sender on the 6 speed for anybody that might know.

DSLRammin

ISSPRO 100 psi boost Trade in that temp sensor for a heart rate monitor gauge I'd like to see that gauge pinned out!!

grizzly660fan

I had a trans temp gauge put on my manual six speed. that tranny does get hot when towing. if not towing, its not worth having a guage on it. never seen it get hot enough to worry when not towing.

I had my gauges installed at a shop, I will look under mine to see where they mounted the probe and get back to you.

I am looking for a manual trans cooler. anyone know where to get one of those? I have seen the "fast coolers" they only seem to help a little. I can wind up my trans temp to 220f or 230f if not careful.

cliffs03hd

thanks for the help guys,