Torque
04-10-2011, 09:29 AM
#2
Registered User
Join Date: Sep 2004
Location: Metamora, MI
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
In German it's Goodntight... from the manual it's:
INSTALLATION
(1) Install propeller shaft with with all reference
marks aligned.
(2) Install transfer case companion flange bolts
and tighten to 30.5 N·m (22.5 ft. lbs.).
(3) Install axle companion flange bolts and tighten
to 108 N·m (80 ft. lbs.).
(4) Install skid plate, if equipped.
(5) Lower vehicle and road test to verify repair.
INSTALLATION
(1) Install propeller shaft with with all reference
marks aligned.
(2) Install transfer case companion flange bolts
and tighten to 30.5 N·m (22.5 ft. lbs.).
(3) Install axle companion flange bolts and tighten
to 108 N·m (80 ft. lbs.).
(4) Install skid plate, if equipped.
(5) Lower vehicle and road test to verify repair.
Thread
Thread Starter
Forum
Replies
Last Post
mitm
24 Valve Engine and Drivetrain
4
08-16-2009 09:29 PM
Firstgenfanatic
1st Gen. Ram - All Topics
11
05-14-2008 06:17 PM
PapaSmurf
3rd Gen High Performance and Accessories (5.9L Only)
3
12-19-2003 02:14 PM
Davidp
Performance and Accessories 2nd gen only
1
02-01-2003 05:49 AM
