torque converter lockup engaging all the time!
#1
Registered User
Thread Starter
Join Date: Sep 2003
Location: Gilbert, Az
Posts: 809
Likes: 0
Received 0 Likes
on
0 Posts
torque converter lockup engaging all the time!
Its like I have my lockup switch on all the time! It started yesterday when I was screwing with wiring under the dash for my stereo, I was moving some wires around and I heard something ground out real quick but my stereo reset so I thought it was that grounding out. I drive the truck and the lockup is on all the time. I figure I messed up my lockup switch check everything with that, I even unplug it from the computer and the converter is still going nuts.
Any suggestions?
Any suggestions?
#4
Registered User
Thread Starter
Join Date: Sep 2003
Location: Gilbert, Az
Posts: 809
Likes: 0
Received 0 Likes
on
0 Posts
Well I found the problem. I have the B.D. transmission with the pressure lock system . Any ways it is wired into the fuse box of an accesorie and when I grounded something out it blew the fuse on the wire. The thing that threw me off was that from the outside the fuse looked fine. So I started checking voltage and there was none and sure enough the fuse blew,
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
93dieselZak
1st Gen. Ram - All Topics
2
06-16-2011 06:10 PM
tomh
3rd Gen Engine and Drivetrain -> 2003-2007
3
02-14-2005 08:26 PM
tractor-man
3rd Gen Engine and Drivetrain -> 2003-2007
6
10-13-2004 02:54 PM
Jambbii
Performance and Accessories 2nd gen only
5
10-18-2003 07:08 PM