tools for getrag rebuild
12-27-2009, 07:39 PM
#1
Registered User
Thread Starter
Join Date: Aug 2005
Location: over yonder back there
Posts: 463
Likes: 0
Received 0 Likes
on
0 Posts
tools for getrag rebuild
what tools, aside from the obvious handtools, do i need to do a getrag rebuild?
i already have a press.
thanks in advance
i already have a press.
thanks in advance
12-27-2009, 09:12 PM
#2
Registered User
Bearing splitter(s), good snap-ring pliers, depth mic. or at least a good set of calipers, brass punches.
Probably some others, but that's what comes to mind.
Probably some others, but that's what comes to mind.
12-28-2009, 10:14 AM
#4
Registered User
Thread Starter
Join Date: Aug 2005
Location: over yonder back there
Posts: 463
Likes: 0
Received 0 Likes
on
0 Posts
do the snap rings have holes in them, or are they the "hole-less" kind?
how big a bearing splitter are we talking?
i want to be sure i am well prepared before getting it apart
how big a bearing splitter are we talking?
i want to be sure i am well prepared before getting it apart
12-28-2009, 10:06 PM
#5
Registered User
Just a regular sized splitter. I think they have 5/8" all-thread on them and roughly 6" wide. I can't remember if they were any of the "holeless" ones or not. I know we did ours with out that kind of pliers, so they must be easy to get at, if it has them.
Thread
Thread Starter
Forum
Replies
Last Post
