TNT SW-#'s
#1
Registered User
Thread Starter
Join Date: Mar 2006
Location: Anacortes Wa.
Posts: 998
Likes: 0
Received 0 Likes
on
0 Posts
TNT SW-#'s
Looking for input about real world differences between TNT Sw 3-5-7- & 9. Currently running SW9 with TQ2/TM2/RP2/WG off. I've tryed SW7 a couple of times, & found it to be exactly the same as SW9 exc. for the throttle is different. It will go OK till it hits about 1800rpm, & then take off. SW9 is a lot more linear.
Question is what to expect from SW3, or SW5? Will I lose performance?
P.S. I am maintaining 24K RP on SW9 as is, so that will not be an issue.
Question is what to expect from SW3, or SW5? Will I lose performance?
P.S. I am maintaining 24K RP on SW9 as is, so that will not be an issue.
#2
Banned
Join Date: Sep 2004
Location: Cedar Grove, New Jersey
Posts: 3,502
Likes: 0
Received 0 Likes
on
0 Posts
24 k? sounds about 3 k short to me........ not sure how long I held it but highest I have seen has been 27,100 and that was flowing through flux 2's 100 hp over nozzles.
Thread
Thread Starter
Forum
Replies
Last Post
2007 5.9
3rd Gen High Performance and Accessories (5.9L Only)
55
09-30-2008 04:56 PM
wyocat
3rd Gen High Performance and Accessories (5.9L Only)
26
06-23-2008 01:39 PM
jmccart
3rd Gen High Performance and Accessories (5.9L Only)
1
06-20-2008 03:29 AM
TORQUE BEAST
3rd Gen High Performance and Accessories (5.9L Only)
13
05-09-2008 02:31 PM
molalla1ton
3rd Gen High Performance and Accessories (5.9L Only)
5
04-16-2008 01:08 PM