VPI

First post here. <br><br>I have had my truck for almost a week 622 miles worth. Loving it ;D. Just stepped away from 2 diffirent 01 and 02 PSD in the last 2.5 years . Did not have very good luck with them. Any way I have a couple of questions. <br><br>1. Will the new hummer h2 wheels fit the bolt pattern on this truck. I can get a new set of those with 315-70-17 BFG AT on them for a good price. <br><br>2. I do a lot of Idiling with my business. It is either idle or stop and start the truck a lot. I run a 3500 watt inverter off of the engine and emergency flashing lights. Realizing that neither is good for it, I want to put a high Idle kit on this truck. One I can manually controll not the one that works when it is cold. I am having trouble finding one for and 03 HO. Can some one help me? I can always put a stick between the seat and gas peddle but I like to look professional when I pull up on a job site. <br> Thanks<br> Tom

blue meanie

Sorry, but the center bore in the wheels is too small.<br> Luckily my brother in law has an extra set, and I was able to try it out first. Possibly they could be machined, but there is very little material between the lug holes and the center bore already. Also, the rear axle sticks out too far to clear the stock h2 center caps. They did look killer sitting loose on the lugs though!

VPI

Thanks for the info I won't waste my time and money on them.