Big Red 97'

Ok i have a set of 16.5 inch rims to go on my truck. I found some 36 inch goodyear claws to put on the rims. When i bought my truck the guy said it had a 3 inch lift. I sometimes wonder if i was lied to on that or not. But im 5' 10" and i do have to stand on my tip toes to reach into the bed so im not really sure. I am wondering if these 36s are goin to rub or not. When i got it it had 33's and they didnt rub at all, they cleared with room to spare. The rims do have 4.75" backspacing so they will stick out quiet a bit. Im not worried about them rubbing the inner fender but will they rub when i turn. Does anyone have pics of there truck with 36's with a small lift like 3 inch or just a leveling kit. I need to know pretty soon.

Here is a pic of my truck. Tell me if you think it has enough room to fit them.

I think the rears will be alright but i may need to put a leveling kit on to help the front a little bit because the front is a little lower than the rear. Tell me what yall think.

blackimpala

With a tape measure, measure from the center of the axle to bottom of fender lip then compare this to a truck that is known to not have a lift.

Floyd

KHoffman

Your truck looks to be stock ride height to me, here is a pic of my truck with a 2" leveling kit and 315/70-17 tires.