TC lockup switch light
11-06-2008, 06:05 PM
#1
Registered User
Thread Starter
Join Date: Sep 2006
Location: Arizona
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
TC lockup switch light
Anyone know how to wire in a LED to show when the TC lockup switch is on?
Right now I have the switch going to the orange/black wire and the other side to ground and it locks up the TC, but the LED is on when the switch is off and the light goes out when the switch is off.
Is there a way to run it through a relay?
Right now I have the switch going to the orange/black wire and the other side to ground and it locks up the TC, but the LED is on when the switch is off and the light goes out when the switch is off.
Is there a way to run it through a relay?
11-06-2008, 07:39 PM
#2
Registered User
Join Date: Nov 2006
Location: Claremont, NH
Posts: 844
Likes: 0
Received 0 Likes
on
0 Posts
Why do you need a relay? run a wire from a key on power source to the led then another wire to the side of the switch that goes to the transmission. When you turn on the switch it will ground the lockup solenoid and the led light. The led will also light when the switch is off and the computer turns on lockup.
That is how mine is, it works great.
That is how mine is, it works great.
Thread
Thread Starter
Forum
Replies
Last Post
93dieselZak
1st Gen. Ram - All Topics
2
06-16-2011 06:10 PM