2nd Gen. Dodge Ram - No Drivetrain Discussion for all Dodge Rams from 1994 through 2002. Please, no engine or drivetrain discussion.

suspension issues

Old 05-22-2008, 04:10 PM
  #1  
Registered User
Thread Starter
 
shrmpboatcptn's Avatar
 
Join Date: Dec 2006
Location: Victoria, Tx.
Posts: 74
Likes: 0
Received 0 Likes on 0 Posts
suspension issues

my truck has a horrible, loud squeaking noise coming from the front end anytime i make the suspension move up or down. Ive already greased everything, it has new shocks, upper/lower ball joints, and upper control arm bushings. Ive loosened the bolts on the lower control arms to take the tension off of them and i still hear the squeaking. Ive also pulled loose the sway bar bushings on the frame and control arms and greased them with silicone grease but it still has the noise. Any help please? The only other things i could think of it being are the tie rod ends although i dont think they would make that much noise, the rubber thing on top of the spring, or maybe the lower control arm bushings although i pulled the bolts out one at a time and greased them too. Someone please help me on this because im running out of ideas on how to get rid of this noise
Old 05-22-2008, 09:47 PM
  #2  
Chapter President
 
Mike D's Avatar
 
Join Date: Nov 2003
Location: Rural Hall, NC
Posts: 3,807
Likes: 0
Received 0 Likes on 0 Posts
I remember reading a TSB about front end noise complaints and it turned out to be a cab/body issue. You could check for TSB's on Dave Fritz's Ram site.

http://dodgeram.org/
Old 07-09-2008, 09:31 AM
  #3  
Registered User
 
studebaker's Avatar
 
Join Date: Jul 2004
Location: Wellborn Fla
Posts: 37
Likes: 0
Received 0 Likes on 0 Posts
Did you get the squeaks fixed? Mine does the same thing. I am going to order and change out the control arm bushings and ball joints on mine.
Old 07-09-2008, 05:21 PM
  #4  
Registered User
 
ahopper's Avatar
 
Join Date: Jan 2007
Location: Flagstaff AZ
Posts: 141
Likes: 0
Received 0 Likes on 0 Posts
i hade the same problem on my 97 it ended up being the body bolts under the cab were loose because i removed the steps and didnt tighten them down enough.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Randy_D250
1st Gen. Ram - All Topics
9
11-01-2013 03:27 AM
steelblitzkrieg
3rd Gen High Performance and Accessories (5.9L Only)
1
08-18-2011 08:06 PM
mtnman006
3rd Gen High Performance and Accessories (5.9L Only)
24
09-08-2009 03:14 PM
leeboy
24 Valve Engine and Drivetrain
8
06-02-2009 10:07 PM
RAMTECH
HELP!
8
03-11-2005 08:40 PM


Thread Tools
Search this Thread
Quick Reply: suspension issues



All times are GMT -5. The time now is 04:48 PM.