Stuck in reverse need quick answer
01-19-2008, 11:22 AM
#1
Registered User
Thread Starter
Join Date: Sep 2006
Location: Ferdinand, ID
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
Stuck in reverse need quick answer
Can you remove the tower without pulling the tranny? Shift fork stuck in reverse but shifter is in nuetral.
01-19-2008, 09:13 PM
#4
Registered User
Join Date: Mar 2006
Location: Albuquerque, NM
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
Mine does that sometimes.
You might be able to play with the clutch and the shifter and get it to go back into reverse, then bump it back a little and try to get it to come out of reverse.
Mine does this anytime I try to stop backing and the drivetrain is in a bind. So far I have been able to get it to come out everytime.
You might be able to play with the clutch and the shifter and get it to go back into reverse, then bump it back a little and try to get it to come out of reverse.
Mine does this anytime I try to stop backing and the drivetrain is in a bind. So far I have been able to get it to come out everytime.
01-20-2008, 02:53 AM
#5
Registered User
Thread Starter
Join Date: Sep 2006
Location: Ferdinand, ID
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
Went ahead and removed the cup holeder console and got to the four bolts that hold the tower on and slipped the reverse fork back into the nuetral position and reinstalled. Everything works fine now. Hopefully it was a freak deal and will not happen again.
Thread
Thread Starter
Forum
Replies
Last Post
Buckshotmckee
Performance and Accessories 2nd gen only
11
07-07-2005 05:06 PM
Mopar_Mudder
Performance and Accessories 2nd gen only
19
05-16-2003 07:34 PM