Stock turbo Specs on a 95????
#1
Stock turbo Specs on a 95????
Does anybody have all the specifications on the oem turbochargers that come on the 1995 trucks? Things like A/R of compressor and turbine? Inducer/Exducer size of both sides etc.....
#2
Registered User
Join Date: Dec 2003
Location: San Marcos, TX
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
It should be an HX35W with a 12cm Turbine Housing.
Try the Holset site for all the specifics...
http://www.holset.co.uk/files/2_1_1_3-Holset%20HX35.php
Try the Holset site for all the specifics...
http://www.holset.co.uk/files/2_1_1_3-Holset%20HX35.php
#5
Registered User
I think the WH1C's and HX35's used on 12valves had the same compressor/turbine setup.
IIRC, the compressor inducer is 56mm, exducer is 83mm. The turbine inducer is somewhere around 70mm and the exducer is 57mm. Holset uses a cross sectional area instead of an A/R; the HX35 and WH1C should both have 12cm^2 turbine housings.
IIRC, the compressor inducer is 56mm, exducer is 83mm. The turbine inducer is somewhere around 70mm and the exducer is 57mm. Holset uses a cross sectional area instead of an A/R; the HX35 and WH1C should both have 12cm^2 turbine housings.
Thread
Thread Starter
Forum
Replies
Last Post
Big Blue24
3rd Gen High Performance and Accessories (5.9L Only)
6
11-27-2008 12:36 PM
omaharam
3rd Gen High Performance and Accessories (5.9L Only)
12
09-17-2007 07:23 PM
06RAMCTD
3rd Gen Engine and Drivetrain -> 2003-2007
0
12-19-2006 04:15 PM