Stock boost on a 600 series?
#2
DTR Advertiser
30 plus pounds between shifts. Settles down around 28-29. Pretty sweet for a stocker, but it does have a big HX40 sized compressor wheel in it out of the box from Dodge.
#3
Registered User
Thread Starter
Join Date: Sep 2002
Location: Las Vegas
Posts: 551
Likes: 0
Received 0 Likes
on
0 Posts
thank you dodge...the only other thing they have done right besides get a CUMMINS!!
ya..i see a top of 31 psi currently...just hooked the guage up a few mins ago
any idea on what your tranny temp should be at during normal everyday driving?
ya..i see a top of 31 psi currently...just hooked the guage up a few mins ago
any idea on what your tranny temp should be at during normal everyday driving?
#4
DTR Advertiser
Ummm, not yet. Did not have the time to drop the pan and weld in the bung. The mag-hytek pan will probably be a priority now. I would be guessing at anything on tranny temp.
IN the interim I hooked to the engine oil. Its generally around the 180-200 mark. Running hard it gets to 220-225.
Don~
IN the interim I hooked to the engine oil. Its generally around the 180-200 mark. Running hard it gets to 220-225.
Don~
#5
i have a auto.. boost up to 34+..
trans 100 - 110.. had it up to 180's in Big Bend National Park on the Rio Grande River road - chasing Customs Agents that where chasing THose crossing the river
I taped into the 2nd test port on my trans right now..
trans 100 - 110.. had it up to 180's in Big Bend National Park on the Rio Grande River road - chasing Customs Agents that where chasing THose crossing the river
I taped into the 2nd test port on my trans right now..
Trending Topics
#8
Registered User
Thread Starter
Join Date: Sep 2002
Location: Las Vegas
Posts: 551
Likes: 0
Received 0 Likes
on
0 Posts
i am running the test port and barely see the guage move...went inbetween 100-180 but nothing even close to anything to have to worry about i guess
Thread
Thread Starter
Forum
Replies
Last Post
moonshinedoc
3rd Gen Engine and Drivetrain -> 2003-2007
3
08-24-2006 07:54 PM
fltfndr
3rd Gen High Performance and Accessories (5.9L Only)
18
08-10-2004 11:21 PM