midwestdually

what are you fellas seeing stock?

Don M

30 plus pounds between shifts. Settles down around 28-29. Pretty sweet for a stocker, but it does have a big HX40 sized compressor wheel in it out of the box from Dodge.

midwestdually

thank you dodge...the only other thing they have done right besides get a CUMMINS!!

ya..i see a top of 31 psi currently...just hooked the guage up a few mins ago


any idea on what your tranny temp should be at during normal everyday driving?

Don M

Ummm, not yet. Did not have the time to drop the pan and weld in the bung. The mag-hytek pan will probably be a priority now. I would be guessing at anything on tranny temp.

IN the interim I hooked to the engine oil. Its generally around the 180-200 mark. Running hard it gets to 220-225.


Don~

ckennedy

i have a auto.. boost up to 34+..

trans 100 - 110.. had it up to 180's in Big Bend National Park on the Rio Grande River road - chasing Customs Agents that where chasing THose crossing the river

I taped into the 2nd test port on my trans right now..

PowerstrokeThis

I'm able to peg my 35 psi guage out for like a sec or 2, I agree it is pretty good for a stocker!!

Don M

The test port does not have fluid on it at all times. The pan will give the best overall reading.

Don~

midwestdually

i am running the test port and barely see the guage move...went inbetween 100-180 but nothing even close to anything to have to worry about i guess