old 300

Just a quick note that I replaced my track bar and inner tie rod end last month because they were worn out. I thought I would notice a bigger difference with the steering but still didn't seem as good as I thought it should be. I hate spending money on something with little or no noticeable improvements. I went farther and noticed that the sway bar end links were also shot so I ordered and installed them.
What a huge difference! I couldn't imaging that would tighten up the truck that much. So if anyone is having issues take a look at the end links, they are a bit hard to move but give them a good look and if they are slack replace them..It was worth the money for once..

seahawkdodge

I ended up replacing everything in the steering system when I did mine. They were all fubar, just like yours.

Big Green11

where did you get the end links from?

old 300

I always look around to see where I can get the best price, not always the cheapest product if you know what I mean. This time for some reason the dealer was the best price. I checked Napa which I use quite alot with good success but the dealer was about 1/2 price. I even called back to ask if their price was for 2 sides but it was only 1. They have a 1 year warranty so if the new ones last as long as the old I won't have any worries.

Doj Dewd

check out member 'XLR8R'. or do a search 'lazar links' or 'lazarlinks'.

i was thrilled with there quality. . . .