Check it out, if you own a 94-02 Dodge Ram and haven't already installed our steering stabilizer brace, then you probably don't enjoy driving your truck as much as you did when it was new. Yea they get a little age on them and after a few times replacing the ball joints, tie rod ends and track bar....just seems like you cant get that "tight" feel back in your steering. Our steering stabilizer brace IS your answer! Think of it as adding an additional cross-member right up in the very front of your frame rails...you know...where all that twisting and flexing is going on. You can do some research online and find customers who installed this brace are extremely satisfied and report that it tightens up the "feel" of the truck altogether... not to mention it also cures the death wobble! We also manufacture these stabilizer braces for the 03-08 and the 09-current Dodge Ram 2500/3500 pick-ups. As always, Custom Diesel products are 100% American Made here in East TN and come with a Limited Lifetime Warranty. Check out the link below for more info.

http://www.custom-diesel.com/dodge-parts-kits/dodge-steering-stablizers/4wd-steering-stabilizer.html

Seeing how you are blatantly breaking patent infrigment laws I'll make a point of never dealing with your company. Anyone does that cant be very honest lol

Wow . . . This sounds so intriguing!!!

Tell me more! Tell me more!

. . . . I just wish someone would have thought of this years ago!

Price is better than other places and so called orginals. I love capitalism and compettition.

Does a patent exist on these?
I think not.

Price is better than other places and so called orginals. I love capitalism and compettition.
I don't like Chinese clones and guys like this that are no better. Theft of intellectual property is still theft.

Cheap knock offs may be fine for you but when I want a generator I buy a Honda not a clone
Does a patent exist on these?
I think not.

Sure it does, owned by solid steel.

Www.solidsteel.biz

I don't like Chinese clones and guys like this that are no better. Theft of intellectual property is still theft.

Cheap knock offs may be fine for you but when I want a generator I buy a Honda not a clone


Sure it does, owned by solid steel.

Www.solidsteel.biz Then DSS should go after all the clones for patent infringement.

Does a patent exist on these?
I think not.

I think your right Danderson.

I don't like Chinese clones and guys like this that are no better. Theft of intellectual property is still theft.

Cheap knock offs may be fine for you but when I want a generator I buy a Honda not a clone


Sure it does, owned by solid steel.

Www.solidsteel.biz (http://Www.solidsteel.biz)


Whats the patent number? And they're not "clones"...just another manufactures version of a product....the same as the other dozen or so manufactures producing them.

I don't like Chinese clones and guys like this that are no better. Theft of intellectual property is still theft.

Cheap knock offs may be fine for you but when I want a generator I buy a Honda not a clone


Sure it does, owned by solid steel.

Www.solidsteel.biz

How about BD's version?

Bottom line is that we strive to build the highest quality product possible while keeping the cost within reason. Thanks to all who support us and our products.

I've seen these for a while and done all the reading as well....Me Likey!!! When does the sale end? Does it still function even with the 08 steering upgrade on an 03?

I've seen these for a while and done all the reading as well....Me Likey!!! When does the sale end? Does it still function even with the 08 steering upgrade on an 03?

Yes, the 03-08 stabilizers are the same...in 09 they changed to the larger gear box and sector shaft...if this is your case then you need to order the 09-current stabilizer. The steering stabilizer brace itself is the same...the hardware kit is the only difference. Sending you a p.m. now.

well i just order one. best price out there. cant see paying more for the same thing. should be here tusday.

well you get what you pay for. its on but took a lot of work to make it fit.

A local shop I use has installed about a dozen 3rd gens with no issues and a couple of 2nds. Ditto there too.
My buddy popped his DSS stabilizer on yrs ago,but mine on my '99 at the time was a bear.

well you get what you pay for. its on but took a lot of work to make it fit.

This on a 2gen? What made the install take a lot of work?

My 3rd gen brace install was pretty simple.

well you get what you pay for. its on but took a lot of work to make it fit.

yes please elaborate on what made the install so complicated. what year truck?

yes please elaborate on what made the install so complicated. what year truck?

well you could see where it had been bolted on before. it mounted to the frame good. but the bearing mounting holes where not even close to fitting. had to drill them out and use smaller blots to get it to fit. i talk with you guys and you offered to send me a new one but it was to late. just pore Quality Control o and i never hard anything else.

well you could see where it had been bolted on before. it mounted to the frame good. but the bearing mounting holes where not even close to fitting. had to drill them out and use smaller blots to get it to fit. i talk with you guys and you offered to send me a new one but it was to late. just pore Quality Control o and i never hard anything else.


I don't mean to sound like a jerk, but why did you continue to install the modify/brace before calling them about it?

I realize it isn't ideal to wait another week while they ship you another one, but you didn't even give them a chance to make it right.

I don't mean to sound like a jerk, but why did you continue to install the modify/brace before calling them about it?

I realize it isn't ideal to wait another week while they ship you another one, but you didn't even give them a chance to make it right.

I did trying to get a hold of them is not so easy. im on the road and playing shipping games is out. could of hauled it around with me for a months or just get it done. point is i'll stay with bigger name compines. that when you get something it fits the first time.

Got mine in Friday and Installed it Saturday...No problems what so ever :)

I did trying to get a hold of them is not so easy. im on the road and playing shipping games is out. could of hauled it around with me for a months or just get it done. point is i'll stay with bigger name compines. that when you get something it fits the first time.

We strive to provide the best customer service and tech assistance in the industry and we are always available after hours to take calls. We want each and every customer to be 100% satisfied. I will be more than happy to send you a new stabilizer. PM me your info and I will get one out ASAP.