Stacks In!!!!!!
#1
Registered User
Thread Starter
Join Date: Feb 2004
Location: Willow Grove, PA
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Stacks In!!!!!!
I finally got these suckers in....after months of waiting and planning. I am a little disappointed though, i think i should've mounted them a few inches closer to the bed. And i am still contemplating how to mount them to the bed. I have the rope around the one cause it leans backward at the moment. Even all the way up it still leans. I welded most of the inner bed joints, which i think contributed to the problem. But if it really bugs me i can just cut it and put a band clamp on there. Thanks for all the help and suggestions, sorry Dave i did this at work during the day,so i figured ya couldn't come help. I just got done so the pics are during the night, i'll get some better ones up and post em. And i painted the pipe in the bed, but from foolin around with it, i scratched it up, that will get fixed as well.
Pic1:
http://img.villagephotos.com/p/2003-9/376630/stack3.JPG
Pic2:
http://img.villagephotos.com/p/2003-9/376630/stack2.JPG
Pic3:
http://img.villagephotos.com/p/2003-9/376630/stack1.JPG
try clickin the link and see if they work now...
Pic1:
http://img.villagephotos.com/p/2003-9/376630/stack3.JPG
Pic2:
http://img.villagephotos.com/p/2003-9/376630/stack2.JPG
Pic3:
http://img.villagephotos.com/p/2003-9/376630/stack1.JPG
try clickin the link and see if they work now...
#4
Registered User
Thread Starter
Join Date: Feb 2004
Location: Willow Grove, PA
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#11
Registered User
Thread Starter
Join Date: Feb 2004
Location: Willow Grove, PA
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
yeah i just rigged up a mounting for them and it pulled em a little closer, but i am gonna have to cut at the elbow where i welded and put a band clamp there so i can get em to line up perpendicular to the gound, right now one is like 10* off. Oh and it sounds AWESOME!!!!!
#14
Registered User
Thread Starter
Join Date: Feb 2004
Location: Willow Grove, PA
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
no the 4" is at the junction where you would take your old exhaust off, just before the resonator, theres only about a foot or two then the 90 into the bed.
I was also concerned about rain, etc. Was thinking just let it idle for a while and anything in the pipes will evap out , i think some guys drill a hole in the bottom of the 9o for some drainage, and some people put coffee cans over em when not drivin
I was also concerned about rain, etc. Was thinking just let it idle for a while and anything in the pipes will evap out , i think some guys drill a hole in the bottom of the 9o for some drainage, and some people put coffee cans over em when not drivin