stacking
#2
DTR 1st Sergeant
Power puck is cheapest... MP-8 most flexible and effective. I have no experience with the edge...
If $$$ are a concern I'd go puck, you can get them used very cheaply and they are effective. If $$$ are not a concern get the MP-8.
If $$$ are a concern I'd go puck, you can get them used very cheaply and they are effective. If $$$ are not a concern get the MP-8.
#5
Registered User
Join Date: Jan 2007
Location: Silver City, NM
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
#6
DTR 1st Sergeant
#7
Registered User
Thread Starter
Join Date: Sep 2007
Location: kansas
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
i have the smarty on the highest seating all the time and the torque mannagment on monderent and it seemes to be fine even lunching in four wheel drive. I just want it to pull a bit harder on the top end.
Trending Topics
#8
Registered User
Join Date: Nov 2006
Location: Republik of Kalifornia
Posts: 486
Likes: 0
Received 0 Likes
on
0 Posts
which program are you running ?
I suggest getting a rail pressure gauge first , this is a nice thing to have so you can have look at what the rail pressure is doing @ wot.
my smarty pulls real hard on the top end 4.3 beta alone with no stack. for street driving and towing the 4.4 beta alone no stack , works very very well & still pulls strong on top end with less power and less coal then 4.3 beta
sleeperman you could benefit more right now from a fuel system & rail gauge, and other needed gauges before adding any pressure boxes, you also will be needing a built transmission very shortly, even with just the smarty on low #s & no stack.
maybe others will chime in soon with more information ......
I suggest getting a rail pressure gauge first , this is a nice thing to have so you can have look at what the rail pressure is doing @ wot.
my smarty pulls real hard on the top end 4.3 beta alone with no stack. for street driving and towing the 4.4 beta alone no stack , works very very well & still pulls strong on top end with less power and less coal then 4.3 beta
sleeperman you could benefit more right now from a fuel system & rail gauge, and other needed gauges before adding any pressure boxes, you also will be needing a built transmission very shortly, even with just the smarty on low #s & no stack.
maybe others will chime in soon with more information ......
#9
Registered User
Thread Starter
Join Date: Sep 2007
Location: kansas
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
I have a boost, pyro, and a tranny temp. Have been looken at a quadzilla recone for the pressure.I need to buy a turbo cuz my pyro is getting peged just with the smarty but dont have the money yet and just want the mp8 for when i drag race somebody.
Thread
Thread Starter
Forum
Replies
Last Post
mcevins
Performance and Accessories 2nd gen only
3
08-30-2003 11:09 PM
John_P
Performance and Accessories 2nd gen only
24
07-13-2003 08:59 AM