Performance and Accessories 2nd gen only Talk about Dodge/Cummins aftermarket products for second generation trucks here. Can include high-performance mods, or general accessories.

Stacking Superchips and Edge Juice / Defueling

Thread Tools
 
Search this Thread
 
Old 02-17-2010, 04:02 PM
  #1  
Registered User
Thread Starter
 
sheriffav8r's Avatar
 
Join Date: Sep 2007
Location: Cape Coral, FL
Posts: 1,101
Likes: 0
Received 1 Like on 1 Post
Stacking Superchips and Edge Juice / Defueling

Does anyone have the Superchips MT3705 and the Edge Juice with Attitude stacked? It seems that if I just have my truck stock (no programmer or chip) I can get 30psi from my little turbo. When I put on the programmer on HI-PERF I only get about 25psi. It also feels like it's defueling when I have the programmer on with the Edge.... Anyone?
Old 02-17-2010, 08:27 PM
  #2  
Registered User
 
illEatUrDuramax's Avatar
 
Join Date: Sep 2008
Location: Katy, TX
Posts: 235
Likes: 0
Received 0 Likes on 0 Posts
what boost are you making when you're only running one of them? try that. perhaps they could be interfering with each other running at the same time? i dont know for sure though. someone who knows more about this should chime in
Old 02-18-2010, 07:52 AM
  #3  
Registered User
 
OldDodgeOwner's Avatar
 
Join Date: Jan 2008
Location: Wheatland, WY
Posts: 830
Likes: 0
Received 1 Like on 1 Post
Probably not a real good idea to run both. Both of those add timing I believe.
Old 02-18-2010, 08:21 AM
  #4  
Registered User
 
high bid's Avatar
 
Join Date: May 2007
Location: Sarasota, FL
Posts: 2,158
Received 8 Likes on 8 Posts
Originally Posted by OldDodgeOwner
Probably not a real good idea to run both. Both of those add timing I believe.
Yep. Schip and Edge will both add timing. The two chips are probably fighting it out.... "NO I get to add the timing you add the fuel this time."

I'd ditch the schip (see my sig).
Old 02-18-2010, 01:21 PM
  #5  
Registered User
Thread Starter
 
sheriffav8r's Avatar
 
Join Date: Sep 2007
Location: Cape Coral, FL
Posts: 1,101
Likes: 0
Received 1 Like on 1 Post
With just the Schip I max out at 26+/- psi. With the Edge it depends on what level I run at (Level 1=20, 2=25, 3=30, 4,5=A Lot). I thought the Superchips used the VP to draw out injector timing and the Edge used its own electronics to do it. I would run just the Edge but I like the tire size fixer on the Superchips and I can't use that without using the performance program.
Old 02-18-2010, 03:17 PM
  #6  
Registered User
 
high bid's Avatar
 
Join Date: May 2007
Location: Sarasota, FL
Posts: 2,158
Received 8 Likes on 8 Posts
I'm not 100% sure the Schip does boost fooling either...mine didn't. With that said you're lucky to get 26psi out of it. I just had the program loaded on my truck when purchased, not the programmer itself.
Old 02-18-2010, 04:29 PM
  #7  
Registered User
 
illEatUrDuramax's Avatar
 
Join Date: Sep 2008
Location: Katy, TX
Posts: 235
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by OldDodgeOwner
Probably not a real good idea to run both. Both of those add timing I believe.
ya i was gonna add in about both adding timing. I would run only one of them
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Havic801
3rd Gen High Performance and Accessories (5.9L Only)
5
11-16-2011 02:34 PM
rogerr03
24 Valve Engine and Drivetrain
1
06-05-2010 02:12 PM
hotrod929
3rd Gen High Performance and Accessories (5.9L Only)
9
12-27-2006 11:10 PM
razor6
3rd Gen High Performance and Accessories (5.9L Only)
22
01-20-2006 03:43 PM



Quick Reply: Stacking Superchips and Edge Juice / Defueling



All times are GMT -5. The time now is 01:20 PM.