Some help please?
#1
Registered User
Thread Starter
Join Date: Nov 2004
Location: Northwest Washington
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Some help please?
Hi,
I have been lurking here for some time now and really appreciate all the advice that has been given out here. I have really learned about the vehicle that I now drive.
I am in the process of installing some gauges now. I got the boost gauge installed today. I am using the 3 gauge dash pod and they look sweet there.
Now to my little problem. For reasons of my own, I am going to put in a post-turbo EGT gauge. I tried to drop the elbow just behind the turbo, but I could not get the clamp off. The bottom clamp fell right off and slid down the exhaust pipe. Great. But I couldn't get the other clamp to come off. It came loose and I could spin it around, but I couldn't get it to come off so I could remove that elbow.
Any advice or hints or tips would be greatly appreciated.
DMH
I have been lurking here for some time now and really appreciate all the advice that has been given out here. I have really learned about the vehicle that I now drive.
I am in the process of installing some gauges now. I got the boost gauge installed today. I am using the 3 gauge dash pod and they look sweet there.
Now to my little problem. For reasons of my own, I am going to put in a post-turbo EGT gauge. I tried to drop the elbow just behind the turbo, but I could not get the clamp off. The bottom clamp fell right off and slid down the exhaust pipe. Great. But I couldn't get the other clamp to come off. It came loose and I could spin it around, but I couldn't get it to come off so I could remove that elbow.
Any advice or hints or tips would be greatly appreciated.
DMH
#3
Registered User
Thread Starter
Join Date: Nov 2004
Location: Northwest Washington
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the reply.
We did have the nut off and was trying to pull it apart with our hands. Not enough strength maybe?
Will try again soon.
Again, thanks.
DMH
We did have the nut off and was trying to pull it apart with our hands. Not enough strength maybe?
Will try again soon.
Again, thanks.
DMH
Thread
Thread Starter
Forum
Replies
Last Post
Mini_Donkeys
Performance and Accessories 2nd gen only
4
04-19-2007 12:21 PM
TxDiesel007
12 Valve Engine and Drivetrain
12
11-29-2006 12:08 PM
SilverHoss99
2nd Gen. Dodge Ram - No Drivetrain
1
10-31-2005 07:22 PM