Solid steel ind. track bar ?
05-19-2010, 10:13 PM
#1
Registered User
Thread Starter
Join Date: Jul 2006
Location: Sweeny, TX
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Solid steel ind. track bar ?
Hey guys i bought and installed the solid steel adjustable track bar for my 01 this past weekend and i was wondering what is the correct or most percise way to adjust and center the front axle? I eye balled it and it looks pretty close but i would like to make it as perfect as possible.
05-19-2010, 11:48 PM
#2
Registered User
Join Date: Apr 2007
Location: Edmonton Alberta
Posts: 2,435
Likes: 0
Received 0 Likes
on
0 Posts
4ft straight edge laid against the tire (vertical) and the fender, on my truck it worked perfectly, straight edge touches fender and top and bottom of tire
I'm running 265-70-17 on 3rd gen rims.
or you can break out a tape measure and measure like points between frame and axel
I'm running 265-70-17 on 3rd gen rims.
or you can break out a tape measure and measure like points between frame and axel
05-20-2010, 11:54 AM
#3
Registered User
Actually, if you didn't try to straighten the steering wheel yet, just adjust the track bar till the steering wheel is in the correct position and you'll be back to where you should be. If you already adjusted the steering wheel, then you going to have to do some measuring.
Thread
Thread Starter
Forum
Replies
Last Post
CTD2001
Performance and Accessories 2nd gen only
3
08-22-2009 10:03 PM
horselady
2nd Gen. Dodge Ram - No Drivetrain
22
01-10-2008 11:24 PM
afoulk
Performance and Accessories 2nd gen only
7
09-06-2007 11:23 PM
just_crankin_it
Performance and Accessories 2nd gen only
13
06-01-2007 04:12 PM
6 Shaker
Performance and Accessories 2nd gen only
4
01-18-2006 06:00 PM