12 Valve Engine and Drivetrain Talk about the 12V engine and drivetrain here. This is for 1994-1998.5 engine and drivetrain discussion only.

Smoke'n Cummins

Thread Tools
 
Search this Thread
 
Old 12-31-2003, 11:16 AM
  #1  
Registered User
Thread Starter
 
Paws's Avatar
 
Join Date: Jan 2003
Location: Idaho
Posts: 206
Likes: 0
Received 1 Like on 1 Post
Smoke'n Cummins

My dad is looking at a stock 95 CTD 5spd 107k thats a real smoker. The idle smoke we can fix when we bump the timing and the cat and muffler fall off. The part I don't know how to fix is the blue smoke when the truck idles down between shifts. We got the truck warmed up and ran the **** out of it. When you run engine to the gov. and then shift blue smoke comes out of the pipe while it winds down. Will the stuff above fix this or do I need to do something else?

Paws
Old 12-31-2003, 11:37 AM
  #2  
Registered User
 
infidel's Avatar
 
Join Date: Dec 2003
Location: Montana
Posts: 14,672
Likes: 0
Received 9 Likes on 9 Posts
Blue smoke usually indicates burning oil.

Does it look like someone has been into the tamper proof part of the injection pump?
They could have slid the plate full forward or turned the star wheel all the way towards the engine. Might need to back them off.
Old 12-31-2003, 11:57 AM
  #3  
Registered User
 
MCummings's Avatar
 
Join Date: Feb 2003
Location: Laredo, Tx, 7 hours south of Dallas
Posts: 1,123
Likes: 0
Received 0 Likes on 0 Posts
Originally posted by infidel
Blue smoke usually indicates burning oil.
Rings/Valves on these motors (engines?) don't seem to wear out to often, so burning oil usually comes from somewhere else.

The Turbo. You can rebuild it with new seals and bearings. Although I haven't "just rebuilt" a turbo, the kits shouldn't be more than $150 for a plain jane rebuild.

You probably have oil leaking by the seals on the turbo, and burning in the exhaust.

That's my $.02

Merrick
Old 12-31-2003, 12:27 PM
  #4  
Registered User
 
infidel's Avatar
 
Join Date: Dec 2003
Location: Montana
Posts: 14,672
Likes: 0
Received 9 Likes on 9 Posts
I had the same thought as Merrick. I've never rebuilt a turbo myself and don't see that it would be all that tuff, but the pros say leave it to experts because it should be balanced afterwards.
These guys have seal rebuild kits for $35 complete for $75. Also have a downloadable instruction manualhttp://www.turboparts.info/pages/634264/index.htm
Old 12-31-2003, 03:19 PM
  #5  
Registered User
Thread Starter
 
Paws's Avatar
 
Join Date: Jan 2003
Location: Idaho
Posts: 206
Likes: 0
Received 1 Like on 1 Post
No its not burning oil, its a fuel type problem. The pump doesn't look like its been tamper with. An old man that never towed anything with it owned it so I dont think he pumped it up.

Paws
Old 01-01-2004, 07:23 PM
  #6  
Registered User
 
tmiller24's Avatar
 
Join Date: Sep 2002
Location: Dayton,Ohio
Posts: 216
Received 0 Likes on 0 Posts
You might wanna double check all the intercooler hose clamps?
Old 01-02-2004, 06:24 AM
  #7  
Registered User
 
infidel's Avatar
 
Join Date: Dec 2003
Location: Montana
Posts: 14,672
Likes: 0
Received 9 Likes on 9 Posts
Read this to see which category your smoke falls into
http://www.freeautoadvice.com/diesel/smoke.html
Old 01-05-2004, 10:35 PM
  #8  
Registered User
 
Rammin On's Avatar
 
Join Date: Apr 2002
Location: St James, MO - USA
Posts: 301
Likes: 0
Received 0 Likes on 0 Posts
Pull the valve covers .... check and make sure all the valve stem seals are present ... I've seen several that were missing seals .... easy fix if that is what it is .....
Old 01-06-2004, 12:13 PM
  #9  
Registered User
 
Palmetto_kid's Avatar
 
Join Date: Sep 2001
Location: Sweeny, Texas
Posts: 772
Likes: 0
Received 0 Likes on 0 Posts
how much blue smoke is it blowing at idle? is it billowing blue smoke, or is it kinda hard to see?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bensdad_canada
3rd Gen Engine and Drivetrain -> 2003-2007
1
05-09-2005 10:56 PM
dhe9
24 Valve Engine and Drivetrain
2
11-14-2003 07:31 AM
PK
24 Valve Engine and Drivetrain
6
10-19-2003 10:28 AM
jbs007
1st Gen. Ram - All Topics
3
07-08-2003 01:29 AM
97CTD
Performance and Accessories 2nd gen only
4
03-17-2003 08:14 PM



Quick Reply: Smoke'n Cummins



All times are GMT -5. The time now is 08:53 PM.