3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

SMARTY, Stage 2 CP3, Flux1 DYNO

Old 03-31-2007, 01:25 PM
  #1  
Registered User
Thread Starter
 
powerstrokin03's Avatar
 
Join Date: Jul 2003
Location: Fort Collins, CO; Midland, TX; Iraan, TX
Posts: 340
Likes: 0
Received 0 Likes on 0 Posts
SMARTY, Stage 2 CP3, Flux1 DYNO

3 pulls, all 3 had smarty on level 9 and then used the ts mp8 to play with some pressure. here are the results all done on a superflow load dyno:


Smarty 9 No Pressure
COLUMN MAXIMUMS
Test: 33107JuddMcLure1
STP Corrected Wheel Power vs. RPM
Range: 2100 RPM - 3000 RPM
EngSpd: 3000 RPM @3000 RPM
STPPwr: 559.9 CHp @2700 RPM
STPTrq: 1140.8 Clb-ft @2500 RPM
Speed : 76.9 mph @3000 RPM
WhlPwr: 473.2 Hp @2700 RPM
WhlTrq: 964.2 lbs-ft @2500 RPM


Smarty 9 Pressure 2%
COLUMN MAXIMUMS
Test: 33107JuddMcLure2
STP Corrected Wheel Power vs. RPM
Range: 2000 RPM - 3000 RPM
EngSpd: 3000 RPM @3000 RPM
STPPwr: 541 CHp @2700 RPM
STPTrq: 1108.5 Clb-ft @2500 RPM
Speed : 77 mph @3000 RPM
WhlPwr: 456.9 Hp @2700 RPM
WhlTrq: 936.3 lbs-ft @2500 RPM

Smarty 9 Pressure 2%
COLUMN MAXIMUMS
Test: 33107JuddMcLure2
STP Corrected Wheel Power vs. RPM
Range: 2000 RPM - 3000 RPM
EngSpd: 3000 RPM @3000 RPM
STPPwr: 541 CHp @2700 RPM
STPTrq: 1108.5 Clb-ft @2500 RPM
Speed : 77 mph @3000 RPM
WhlPwr: 456.9 Hp @2700 RPM
WhlTrq: 936.3 lbs-ft @2500 RPM
Old 03-31-2007, 01:27 PM
  #2  
Registered User
Thread Starter
 
powerstrokin03's Avatar
 
Join Date: Jul 2003
Location: Fort Collins, CO; Midland, TX; Iraan, TX
Posts: 340
Likes: 0
Received 0 Likes on 0 Posts
attached are the dyno graphs
Attached Thumbnails SMARTY, Stage 2 CP3, Flux1 DYNO-pull1.jpg   SMARTY, Stage 2 CP3, Flux1 DYNO-pull2.jpg   SMARTY, Stage 2 CP3, Flux1 DYNO-pull3.jpg   SMARTY, Stage 2 CP3, Flux1 DYNO-all3.jpg  
Old 03-31-2007, 01:34 PM
  #3  
Registered User
 
t-boe's Avatar
 
Join Date: Nov 2006
Location: Rock Springs, WY
Posts: 2,864
Likes: 0
Received 0 Likes on 0 Posts
That's kind of weird that the MP-8 would decrease your hp levels. Good numbers though!
Old 03-31-2007, 01:52 PM
  #4  
Registered User
Thread Starter
 
powerstrokin03's Avatar
 
Join Date: Jul 2003
Location: Fort Collins, CO; Midland, TX; Iraan, TX
Posts: 340
Likes: 0
Received 0 Likes on 0 Posts
ya, i am confised as too why. also with all 3 pulls had an overboost code, which i thought both the mp8 and SMARTY did boost fooling. so i dont know im lost on that.
Old 03-31-2007, 01:55 PM
  #5  
Registered User
 
t-boe's Avatar
 
Join Date: Nov 2006
Location: Rock Springs, WY
Posts: 2,864
Likes: 0
Received 0 Likes on 0 Posts
Try a boost fooler I guess.
Old 03-31-2007, 02:19 PM
  #6  
Registered User
 
omaharam's Avatar
 
Join Date: Jun 2005
Location: Nebraska
Posts: 2,452
Likes: 0
Received 0 Likes on 0 Posts
What is STP Power? It looks like your wheel hp was 473. I see a TST in your sig, so that was without the TST?

Your truck might be one of those that doesn't like the SMARTY all that well. The SMARTY made less power on my truck than the HOT Juice. With HOT Juice, mp-8, and stage 1 cp3 I made 502 wheel hp.
Old 03-31-2007, 02:33 PM
  #7  
Registered User
Thread Starter
 
powerstrokin03's Avatar
 
Join Date: Jul 2003
Location: Fort Collins, CO; Midland, TX; Iraan, TX
Posts: 340
Likes: 0
Received 0 Likes on 0 Posts
STP is super flows corrected numbers for wheel power so the 559 is corrected at the wheels
Old 03-31-2007, 02:58 PM
  #8  
Registered User
 
omaharam's Avatar
 
Join Date: Jun 2005
Location: Nebraska
Posts: 2,452
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by powerstrokin03
STP is super flows corrected numbers for wheel power so the 559 is corrected at the wheels
Ok, good. I was worried for you. That was without the TST? What elevation is that at? Don't know much about correction factors. I dynoed at like 950ft so he doesn't bother with a correction factor.
Old 03-31-2007, 03:34 PM
  #9  
wap
Registered User
 
wap's Avatar
 
Join Date: Aug 2005
Location: Ga.
Posts: 3,563
Likes: 0
Received 1 Like on 1 Post
Originally Posted by powerstrokin03
STP is super flows corrected numbers for wheel power so the 559 is corrected at the wheels
Good numbers, I too was worried when I first saw the post. I thought the 47? was the actual numbers.
Old 03-31-2007, 04:32 PM
  #10  
Registered User
Thread Starter
 
powerstrokin03's Avatar
 
Join Date: Jul 2003
Location: Fort Collins, CO; Midland, TX; Iraan, TX
Posts: 340
Likes: 0
Received 0 Likes on 0 Posts
No on the super flow dyno corrected numbers are the STP numbers. The TST was not used and not even on the truck.
Old 03-31-2007, 06:18 PM
  #11  
Registered User
 
w.tx iceman's Avatar
 
Join Date: Sep 2004
Location: big spring tx.
Posts: 533
Likes: 0
Received 0 Likes on 0 Posts
where did you dyno your truck at
Old 03-31-2007, 06:30 PM
  #12  
Registered User
Thread Starter
 
powerstrokin03's Avatar
 
Join Date: Jul 2003
Location: Fort Collins, CO; Midland, TX; Iraan, TX
Posts: 340
Likes: 0
Received 0 Likes on 0 Posts
GAM, in greeley co...not in texas this part of the year
Old 04-01-2007, 12:21 AM
  #13  
Banned
 
973604x4's Avatar
 
Join Date: Apr 2006
Location: College Station, Texas
Posts: 3,141
Likes: 0
Received 0 Likes on 0 Posts
looks good buddy

niiice numbers.
Old 04-01-2007, 01:45 AM
  #14  
Registered User
Thread Starter
 
powerstrokin03's Avatar
 
Join Date: Jul 2003
Location: Fort Collins, CO; Midland, TX; Iraan, TX
Posts: 340
Likes: 0
Received 0 Likes on 0 Posts
Thanks ill dyno again next weekend with the TST
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jethro6213
3rd Gen High Performance and Accessories (5.9L Only)
19
07-11-2008 11:59 AM
lowboy18011
3rd Gen High Performance and Accessories (5.9L Only)
18
12-01-2006 06:46 PM
Doubleover
3rd Gen High Performance and Accessories (5.9L Only)
10
04-21-2006 02:38 AM
052500#1
3rd Gen High Performance and Accessories (5.9L Only)
13
01-06-2006 03:27 PM
timb
1st Gen. Ram - All Topics
18
08-19-2005 10:16 PM


Thread Tools
Search this Thread
Quick Reply: SMARTY, Stage 2 CP3, Flux1 DYNO



All times are GMT -5. The time now is 07:54 AM.