BigDogJeepin

Before I tear into it and find I don't have that particular size bit .

Thanks!

Doggmeat

dont remember off hand but if you have a t-15 to t-40 in your tools you should be set. im not sure, memory is off but im thinking maybe a t-25.

no_6_oh_no

Its not a torx, 1/4" bolts hold the VB to the case. The torx hold the filter on.

Doggmeat

yes they hold the filter on- what size i dont recall-- been a while, dont need tools anymore, work at a gun powder plant now. should be 11mm for the bolts if i remember correctly. and use an inch pound torque wrench to put back together.

1985cucv

they hold the filter on and they hold the vavle body together an 11mm holds the valve body in the trans 13 mm for the pan bolts and

dirtracer1880

t-25 torx bit is aht size you need to take the filter off