what size nozzles?
#1
Registered User
Thread Starter
Join Date: Aug 2007
Location: mankato,mn
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
what size nozzles?
looking for advice on what size nozzles to go with on my 06, looking to peak at 700-725hp with sps66,stage 2 cp3,smarty,mp-8,fass150, banks intercooler.
been getting lots of different advice. looking for decent street mannors also, thanks for the help, thinking 120-200hp range
been getting lots of different advice. looking for decent street mannors also, thanks for the help, thinking 120-200hp range
Last edited by kruegerlouie; 01-28-2008 at 11:48 PM. Reason: turbo
#2
Registered User
Join Date: Jan 2006
Location: Indiana
Posts: 3,597
Likes: 0
Received 0 Likes
on
0 Posts
I was told that about 165hp is the max for a stage 2 pump. thats what I run and I get no cut out or anything driving. I get a little bit if you are setting still and rev the truck up. I have an 06 with similar mods to you other than injectors and it was very close to 700hp on the dyno. I run a little bigger turbo but they dyno about the same numbers
#3
The phat shaft with 175hp sticks will have poor road manners and your egt's will be up there. If I were you would get flux injectors from don m. They are the cleanest burning injectors i've seen.
#4
Registered User
Thread Starter
Join Date: Aug 2007
Location: mankato,mn
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
im almost thinkin the sticks i need for 700hp wont be that nice to daily drive, and thought about just installing them in june to sept for comp. and switching back to stock but how would the big turbo act with stock nozzles and just the smarty&mp8????
Thread
Thread Starter
Forum
Replies
Last Post
schoust
2nd Gen. Dodge Ram - No Drivetrain
4
10-21-2009 10:09 AM
bigdogtruck
2nd Gen. Dodge Ram - No Drivetrain
18
11-21-2007 08:09 PM