the short curved hose that, ideas?
#1
Registered User
Thread Starter
Join Date: Feb 2009
Location: THE ROCK - WEST COAST B.C.
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
the short curved hose that, ideas?
can anyone tell me where to get the short curved hose that
connects the fuel heater/pre-filter assembly to the lift pump. (other than the dealer) would prefer a better than stock item.....for now I have an 18 inch piece of 1/2 inch fuel line in a big loop, as the 90degree bend is too sharp and kinks, side of the freeway fix
connects the fuel heater/pre-filter assembly to the lift pump. (other than the dealer) would prefer a better than stock item.....for now I have an 18 inch piece of 1/2 inch fuel line in a big loop, as the 90degree bend is too sharp and kinks, side of the freeway fix
#7
Registered User
Thread Starter
Join Date: Feb 2009
Location: THE ROCK - WEST COAST B.C.
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
I tried the short brass double nipple elbow....no go, bad alignment, one side of the hose is very short and there is no room for a nipple without modification
Trending Topics
#8
I bought a replacement sending unit for the fuel tank and the same hose from these folks.
http://www.wholesalemopar.com/parts_...FRRSgwodrF2XMA
Think I paid 5.00 for the hose. I believe it was about 60.00 for both including shipping...I called them and they really knew their stuff too. And the shipping was fast.
http://www.wholesalemopar.com/parts_...FRRSgwodrF2XMA
Think I paid 5.00 for the hose. I believe it was about 60.00 for both including shipping...I called them and they really knew their stuff too. And the shipping was fast.
#9
Registered User
Join Date: May 2007
Location: Waukon, IA
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Big Horn 06
3rd Gen Engine and Drivetrain -> 2003-2007
6
08-25-2014 09:34 AM
DJ Turbo.
1st Gen. Ram - All Topics
9
11-05-2011 12:20 AM