sensor on air intake hose????
07-18-2003, 11:41 AM
#1
Registered User
Thread Starter
Join Date: Jul 2003
Location: Westminster, CO
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
sensor on air intake hose????
I'm doing the BHAF (AH19002) and am using a 4" pipe for the connection between the filter and flex line. There is a sensor on the stock air box that is going to have to be mounted to the 4" pipe. What is this sensor for and is it going to mess with it if I mount it to the pipe? It looks like a vacuume sender to me. ???<br><br>Yeah I know, I'm beatin the filter thing to death. :P I just don't want to use an oiled filter on the roads I travel.<br><br>Thanks<br>Mule
07-18-2003, 04:51 PM
#2
Administrator
Re:sensor on air intake hose????
I do believe that is the IAT sensor.<br>(Intake Air Temp).<br><br>Its either that or the filter minder sucky downy thingy, but it wouldn't have wires connected to it.<br><br><br>phox
07-21-2003, 01:28 AM
#4
Registered User
Join Date: Mar 2002
Location: Drive till ya hit a Polar Bear, then go back 50 miles
Posts: 1,062
Likes: 0
Received 0 Likes
on
0 Posts
Re:sensor on air intake hose????
IAT/AP Sensor (Intake Air Temp/Air Pressure). You'll definitely want to get that critter in the pipe after the BHAF. As long as you don't draw any kind of vacuum, the aftermarket system will help the ECM maintain proper fueling levels (the ECM defuels as that sensor detects lower pressure).<br><br>Rod
Thread
Thread Starter
Forum
Replies
Last Post
MedicShawn
3rd Gen Engine and Drivetrain -> 2003-2007
4
11-14-2010 08:10 PM
Strjock81
3rd Gen Engine and Drivetrain -> 2003-2007
3
02-03-2007 11:19 PM