4x4

Does anyone have any info on the engine/drivetrain/axles are set up? I just need some kind info on how in the world this awsome truck stays together . Info and even rumors are geatly appreciated ;D

4x4

4x4

I would think somebody has heard something ???

4x4

Monty

Here is what I have heard. The injection pump is a 12cyl inline. With each injector being fed by 2 delivery valves. Boost in excess of 200psi off the line is not uncommon, and RPM in excess of over 5k.

SolidJunkMM

They also break things. They had drive shaft yoke and ring and pinion troubles after Friday's pull at Diesel Extravaganza.

4x4

Thanks for the replies. ;D
You can really use the word awesome to describe that truck!

4x4

SjLingenfelter

What kind of setup is he using I know it needs ether to start. But does he really spool to over 200psi?

Lil Dog

I don't know about 200 psi, but I'm sure he is well into the 70-80 range. With the amount of smoke he shoots, I don't think he has alot of air with that fuel.. At 200 psi it would require a cooler and piping from a gas compressor package for his intercooler and temperatures in the mid 300°F intake.

200 Psi would require 3 staging the turbos I would think..??

None the less, I think Schied has a website.

J-eh

Monty

No, it was 200psi. Daniel, aka CMNS_PWR was there and seen it when he blew the head gasket, last year I believe (The video is floating around somewhere). Said he had a laptop in the truck that showed all vital readings, when he left the line he was over 5 grand and over 200psi. Couldnt tell how far over 200psi because his computer only went up that far. And yes, he has a mist system for the intake air.

4x4

I have that video, but don't know how to post it.

4x4

Promoter

Rumors,rumors,rumors.....where do you guys come up with these?

DarrellB

Kent and Ed came down here to Lanesville Friday night and put on one heck of a show for the crowd at my pull. 8) I don't care what he's running as long as he keeps doing it. There was another truck from Ohio that was here as well (almost the twin to Kent's ride) and he ended up beating Kent. No one knew who he was but he really had that Dodge screamin. Those guys really wowed the crowd, all I heard at the pull Saturday was "those trucks where really pi_ _ed off" ;D

Thanks again to all the 8,000lb Diesel Super Stock pullers for putting on one awesome show. Hope to see you guys back next year.

DB

Lil Dog

[quote author=Monty(OkieBroncRider) link=board=8;threadid=19623;start=0#msg184985 date=1063659545]
No, it was 200psi. Daniel, aka CMNS_PWR was there and seen it when he blew the head gasket, last year I believe (The video is floating around somewhere). Said he had a laptop in the truck that showed all vital readings, when he left the line he was over 5 grand and over 200psi. Couldnt tell how far over 200psi because his computer only went up that far. And yes, he has a mist system for the intake air.
[/quote]



wow...

J-eh

Monty

Like I said, this was passed on to me. So, take it lightly. But, you wanted rumors, so I gave you what I knew.

Lil Dog

Well, just for giggles I went to see what HVAC's truck ran in his drag truck, 90 Psi..

So I guess 200 isn't inconceivable. Still blows my mind..

J-eh

SolidJunkMM

I am going to guess that the Ohio truck was also a Scheid prepared truck. I talked to the guys at Scheid's Lafayette a couple of weeks ago when I was returning my TC core. They told me that they had just finished building a puller for a guy in OH. Either way ya gotta love the hood stack 8)