HappyGA

I can get a set of used Rv 275 injectors for $200. I don't kmnow the guy from adam, and was wondering if I should have him get them pop tested to make sure they are pretty much equal.

how hard is it to install these injectors on the 2001 dodges? Is it a do it yourself project. Or should I just let the local diesel shop do it, while they check the lash? Truck hass 133,000 on it now, and has never had a tune up, so I thought I would get the lash adjustment done, that is if the valve cover has to come off to put the injectors in.

Tiny

For a little more money I would buy new. I got mine for less than $300.

Mike D

Injector install is pretty straight forward, valve cover has to come off. Don't know about checking the valves, but couldn't be that hard.

http://www.lib.uaa.alaska.edu/~tibor...structions.pdf

HOHN

If you go with 275s, buy new. Do it yourself and save the money. Injector install is NOT hard, and there are no special tools, aside from maybe a 19mm stubby wrench.

PM if you need help

BigBlue

Buy new ones. They are to cheap to not buy new. I installed mine in about 2 hours and that's including lunch.