replacing front fender
05-25-2008, 09:10 AM
#1
Registered User
Thread Starter
Join Date: Aug 2005
Location: ARVADA CO
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
replacing front fender
Well I did it. I jacked up the right front fender. I have checked two websites for prices and am wondering how tough it is to remove and replace a front fender on these trucks. Anybody done this and what can you telll me about it.
05-25-2008, 09:41 PM
#2
Registered User
Join Date: Dec 2007
Location: North Carolina or Kentucky. Take your pick
Posts: 2,738
Received 0 Likes
on
0 Posts
Not a bad job.
1. REmove front bumper assy
2. Diconnect batteries and remove right battery and tray.
3. Romove wiring harness tie downs and connections on rt side.
4. Remove wheel house liner.
5. Disengage AC tubing from clips.
6. REmove front fender to cowl attaching bolts.
7. Remove front fender to rad closure panel bolts.
8. Remove bolts at bottom of fender
9. Open door and remove bolts from fender to hinge pillar.
10. Remove bolts at top of fender and pull loose.
11. Remove anything in mised in earlier steps and what is left.
1. REmove front bumper assy
2. Diconnect batteries and remove right battery and tray.
3. Romove wiring harness tie downs and connections on rt side.
4. Remove wheel house liner.
5. Disengage AC tubing from clips.
6. REmove front fender to cowl attaching bolts.
7. Remove front fender to rad closure panel bolts.
8. Remove bolts at bottom of fender
9. Open door and remove bolts from fender to hinge pillar.
10. Remove bolts at top of fender and pull loose.
11. Remove anything in mised in earlier steps and what is left.
Thread
Thread Starter
Forum
Replies
Last Post
Eddy Reyes
3rd Gen High Performance and Accessories (5.9L Only)
32
06-05-2007 07:36 PM
Fisherguy
3rd Gen High Performance and Accessories (5.9L Only)
5
04-13-2006 09:17 PM
