replacement bumpers??
#1
replacement bumpers??
i'm buyin an 02 SB, wantin to look into my options of replacement front and rear bumpers, types and styles, also lookin at just brush gaurds, anyone have cool combos?? been lookin at ranch hand front and rears, but just might drive the truck a while before i do it,,
also want to know what all to look at on the truck, its an 02 with 99k miles, been thru a little hail but the guys replacin the hood and roof skin ,,and already has an 80 hp box oh yeah
cowboy
also want to know what all to look at on the truck, its an 02 with 99k miles, been thru a little hail but the guys replacin the hood and roof skin ,,and already has an 80 hp box oh yeah
cowboy
#2
Registered User
Here is my full front replacement bumper, similar to ranch hand: and it costed me 417 us dols here in mexico,at the factory where they are made.
From here they are shipped to western depot, they are a bit over 600
i like this one better then ranch hand, these are available with or without fog lights...
lOOk into my gallery as well, for more pics.
From here they are shipped to western depot, they are a bit over 600
i like this one better then ranch hand, these are available with or without fog lights...
#6
Administrator
Originally Posted by MKELLY
Commatoze, where can I can info on Denver Off Road, that bumber is awesome.
Mine:
phox
Trending Topics
#8
Registered User
Join Date: May 2004
Location: Terryville, Ct
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
What a nice clean look, how does the black powder hold up?? My Westin Bull Bar in Black looks like it's 20 yrs old. It's only 3 and rusting out bad. The perfomance mags that I get have nothing sharp like that Denver.
#9
Registered User
Join Date: Mar 2004
Location: Iowa
Posts: 1,110
Likes: 0
Received 0 Likes
on
0 Posts
The Denver off Road I will be picking up will be a silver powder coat, and Layne had mentioned a few other possibilities when I spoke with him. The easiest would be to just give him a call.
mishkaya
mishkaya
#14
Registered User
MKUBACAK - Very nice set up! Love the DOR's! Can't beat the light weight yet tough 1/2" Aluminum.
Even got a picture of you taking the picture
That's the first DOR Rear Bumper (with storage) I've seen mounted. I assume it locks?... and is water tight? How deep (added truck length) is it?
Being very picky here... but no one powder coats or paints the front bolts?
RJ
Even got a picture of you taking the picture
That's the first DOR Rear Bumper (with storage) I've seen mounted. I assume it locks?... and is water tight? How deep (added truck length) is it?
Being very picky here... but no one powder coats or paints the front bolts?
RJ
#15
Registered User
Originally Posted by rjohnson
MKUBACAK - Very nice set up! Love the DOR's! Can't beat the light weight yet tough 1/2" Aluminum.
Even got a picture of you taking the picture
That's the first DOR Rear Bumper (with storage) I've seen mounted. I assume it locks?... and is water tight? How deep (added truck length) is it?
Being very picky here... but no one powder coats or paints the front bolts?
RJ
Even got a picture of you taking the picture
That's the first DOR Rear Bumper (with storage) I've seen mounted. I assume it locks?... and is water tight? How deep (added truck length) is it?
Being very picky here... but no one powder coats or paints the front bolts?
RJ
Yes it locks. It is not water tight. I guess you could add some weather stripping or something. I drilled a couple of .125" holes in the bottom for rain water to drain. It is about 7" from the end of the bed.
Not sure on the bolts, but I really hope it does not start to bug me since I never really thought about it before.
Thread
Thread Starter
Forum
Replies
Last Post
LanceK
3rd Gen High Performance and Accessories (5.9L Only)
4
02-12-2007 12:58 PM
AggiePhil
Performance and Accessories 2nd gen only
12
01-06-2006 08:01 AM
TexasCTD
3rd Generation Ram - Non Drivetrain - All Years
14
03-16-2005 02:31 AM
AggiePhil
Performance and Accessories 2nd gen only
5
01-24-2004 04:47 PM