Replaced stock exhaust with MBRP parts
#1
Registered User
Thread Starter
Join Date: Aug 2007
Location: Utah
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Replaced stock exhaust with MBRP parts
Hi All,
I have an 07 5.9L quad cab 2500 truck. Rather than replacing the complete exhaust system, I replaced the muffler with the MBRP muffler replace kit, then a year later (this summer) I put on the MBRP Cat test pipe. I live in a county where a diesel emissions test is required every two years and they do a visual inspection for the cat.
On my last camping trip the whole exhaust pipe pulled of from the stock downpipe back. I guess I did not have the band clamp tight enough but it was cranked on as tight as I could get it.
I need a recommendation on a better band clamp than the ones I used (Diamond Eye) and also how to pull apart the junction where the tailpipe meets the rear of the MBRP muffler.
Thanks for your help!
I have an 07 5.9L quad cab 2500 truck. Rather than replacing the complete exhaust system, I replaced the muffler with the MBRP muffler replace kit, then a year later (this summer) I put on the MBRP Cat test pipe. I live in a county where a diesel emissions test is required every two years and they do a visual inspection for the cat.
On my last camping trip the whole exhaust pipe pulled of from the stock downpipe back. I guess I did not have the band clamp tight enough but it was cranked on as tight as I could get it.
I need a recommendation on a better band clamp than the ones I used (Diamond Eye) and also how to pull apart the junction where the tailpipe meets the rear of the MBRP muffler.
Thanks for your help!
Thread
Thread Starter
Forum
Replies
Last Post
Dynocon
3rd Gen Engine and Drivetrain -> 2003-2007
2
08-12-2010 10:46 AM
walker
3rd Gen High Performance and Accessories (5.9L Only)
0
06-12-2007 07:09 PM
CTD_Neil
Performance and Accessories 2nd gen only
1
07-19-2005 08:13 PM