Removing Silencer Ring help
12-01-2003, 11:17 AM
#2
Registered User
Join Date: Apr 2003
Location: Houston, Tx
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
Re:Removing Silencer Ring help
Try this thread https://www.dieseltruckresource.com/...4162#msg204162]
12-01-2003, 11:18 AM
#3
Registered User
Join Date: Nov 2003
Location: orlando FL
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Re:Removing Silencer Ring help
pull off front rubber intake that goes into the front of the turbo. loosen hoseclamps pull it clear
on the inside of the turbo you will see a expanson ring around the outer edge holding a metal plate with a whole in the middle, that is the silencer ring. just use 2 small screwdrivers to work that ring out of the grove and pull the ring out. hope this helps
on the inside of the turbo you will see a expanson ring around the outer edge holding a metal plate with a whole in the middle, that is the silencer ring. just use 2 small screwdrivers to work that ring out of the grove and pull the ring out. hope this helps
12-01-2003, 06:49 PM
#5
Registered User
Join Date: Oct 2003
Location: Richmond Michigan
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
Re:Removing Silencer Ring help
what screwstokin said I had mine off in about 10 min it's real simple. Once you get an end started just keep working it around. It is kinda like taking off any snapring if you have done that it is the same thing. then listen for the whistle the more air the better the whistle
Thread
Thread Starter
Forum
Replies
Last Post
PapaPerk
3rd Gen Engine and Drivetrain -> 2003-2007
23
01-01-2005 07:33 AM
brandon507
3rd Gen Engine and Drivetrain -> 2003-2007
14
07-17-2004 08:40 AM
jrs_dodge_diesel
24 Valve Engine and Drivetrain
17
12-12-2003 08:16 AM
tanderson2002us
24 Valve Engine and Drivetrain
5
10-15-2003 10:24 PM