KATOOM

I'm trying to take off the wipper arms to check and maybe swap but I cant seem to get them off and I dont want to break or scratch something. The hood doesnt seem to open far enough and I cant seem to do it when its closed either. I see a little clip like retainer or something like that at the base but not sure what it is. Whats the trick? Thanks for the help.

Tfeore

Try this, flip the wiper to 90*, pull the clip about 1/8" then pull the entire wiper assy. straight up.
let me know how this works out.

Commatoze

Ditto on the above. Also if you can direct a squirt of WD-40 using the plastic tube around the joint, then tap gently it with a mallet, it'll help break the corrosion.

KATOOM

Thanks, but I thought after looking at the way the hood opens I was under the impression I couldn't flip the wiper arm up to a 90*. But I will give it another try.

kingofdodge7131

dont even have to take it up that far, just level it out and the pin will come out

Commatoze

You can't, you have to lift the hood a little, but the post above is correct too.

Tfeore

Katoom, sorry about the hood. I didn't look at your sig
Just looked at how mine appear to come off.

Haulin_in_Dixie

They come off real easy with the hood off Wonder how I knew that