how to remove silence ring
#1
Banned
Thread Starter
Join Date: Sep 2003
Location: ILLLLINOIS
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
how to remove silence ring
hey guys i was wondering how to remove my silencer ring off my truck i cant find it on tdr or here...I WANT TO HEAR THE TURBO MORE :
#2
Thats MR Hoss to you buddy!
#4
Thats MR Hoss to you buddy!
Re:how to remove silence ring
Hehehe....that also has been discussed many times. ;D Maybe...maybe not....depending on where you take it for service. Technically, you're modifying the turbo....so technically, they could void the warranty on the turbo if they wanted to. However, I seriously doubt that many dealerships would even notice it's not there.
Trending Topics
#8
Registered User
Join Date: May 2003
Location: new york, where else?
Posts: 675
Likes: 0
Received 0 Likes
on
0 Posts
Re:how to remove silence ring
it also helps if you replace the SILENCER TUBE, the black plastic tube thats between the airbox, and the turbo. it has an X shape inside it to muffle the whistle. Geno`s sells one for 50 bucks, a little steep for a tube. i was lucky to have member mark thomas make one for me, 15 bucks i think. he did a reel nice job,you can PM him, i dont know if he`s still making them.now, when i put my foot into it a little, i can really hear her sing
#9
Re:how to remove silence ring
Yes, fix the tube also...I had another reply, but jacked it up.
I have the original tube minus the baffle...not the best thing to do. I am designing my own tube/velocity stack as its replacement.
John
I have the original tube minus the baffle...not the best thing to do. I am designing my own tube/velocity stack as its replacement.
John
#10
Thats MR Hoss to you buddy!
Re:how to remove silence ring
I'm hesitant to replace the tube for one simple reason....it will be obvious. If they see the tube is replaced, they will likely suspect the silencer ring is missing...when they otherwise never would have checked. They could decide to be jerks and void the warranty on the turbo. I'll replace the tube when I'm out of warranty.
#11
Registered User
Join Date: Dec 2002
Location: Greenville, South Carolina
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
Re:how to remove silence ring
Yea, I'm with Hoss on this. I have a phobia about DC voiding the warranty. When it's up, I'll also replace the tube.
#12
Registered User
Re:how to remove silence ring
Sounds a little ricey folks....mods that don't give any performance? Why not put a big fin on the truck, spinning rims, and a pop can muffler?
#13
Registered User
Join Date: Dec 2002
Location: Llano, TX
Posts: 637
Likes: 0
Received 0 Likes
on
0 Posts
Re:how to remove silence ring
The silencer ring is there to do one thing, silence the turbo. Take it out- it'll make the turbo louder. Will it void a warranty? No, the only thing it does is make the turbo quieter. That's why DC put it there. Truck runs exactly the same with or without. Now if you go in the turbo and hack up the blades trying to get the ring out, that'll probably void the warranty. ;D
#15
Thats MR Hoss to you buddy!
Re:how to remove silence ring
[quote author=Lightman link=board=20;threadid=19739;start=0#msg186147 date=1063852733]
Sounds a little ricey folks....mods that don't give any performance? Why not put a big fin on the truck, spinning rims, and a pop can muffler?
[/quote]
That might void the warranty. :
Sounds a little ricey folks....mods that don't give any performance? Why not put a big fin on the truck, spinning rims, and a pop can muffler?
[/quote]
That might void the warranty. :