Removal of Edge Comp!
#1
Registered User
Thread Starter
Join Date: Mar 2006
Location: maryland
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Removal of Edge Comp!
I just took out my edge comp box and replaced the vp44 on my 2001, now its throwing codes. These are the codes P1475, P0343, P1286, P0123, and P1693. They all seem to be related to high voltage, did I miss anything that comes to mind for anyone. Any help greatly appreciated.
#2
High voltage codes mean open circuits. The pcm will send out a regulated voltage of usually 5 or 8 volts to the various sensors then monitors the drop with an internal volt meter. When a circuit is open or a sensor is unplugged the supply voltage is not used up by the sensor so the voltage is "high". Turning the key on without everything plugged in will set this type of fault.
Thread
Thread Starter
Forum
Replies
Last Post
lvmknsmoke..
Performance and Accessories 2nd gen only
1
08-13-2009 10:59 PM
mx684
Performance and Accessories 2nd gen only
13
07-24-2007 07:52 PM
JD farmboy
Performance and Accessories 2nd gen only
4
05-21-2006 01:04 PM
rockjeep73
Performance and Accessories 2nd gen only
7
03-25-2005 03:34 AM