zander79

I have some basic mods (see signature) but I would like to know what options I have for getting a faster turbo spool. I thought the edge EZ would help but it seems to only work on the mid to high RPMs. Would a ATS intake manifold help? Thanks you guys rock!

tesla440

I've put the ATS intake manifold on mine. I did notice it helped a little with the TAG, but the ATS manifold feels more stronger from 1700 & up. I've read that people have had good results in modifying the FCA (Fuel control actuator) from the DIY CP3 mod. I still haven't had a change to modify mine yet, but from that thread it sounds like its what you're looking for. You can do a search for "cp3 mod" to find it.

MOJO1

Me to hate lag i stacked BDTD-MP-8 helped a littel not much.

Farmer Davis

With turbo lag I've seen the same thing with ATS manifold. It seems to work better above that 1600-1700 rpm level.

CButler610

Very simple, a downloader like the Bully Dog with low-end fueling (enabled). Lag=gone.

StrokeThisCTD

Like CButler said, BDDL. My triple dog on the performance setting with low end power enabled lights the turbo very quickly.

drewblood

what do i need to do to get low end with my bdtd

973604x4

should be an option when loading it into your truck. if not, go update your Triple Dog and re-install.

Sloverado

Smarty is a good way too!

MOJO1

Were did you find it at? Very simple, a downloader like the Bully Dog with low-end fueling (enabled). Lag=gone.
My BDTD has the latest updats i stll dont see it.

wagonhauler

Quadzilla or MP-8 will help a lot.

zander79

Thanks for the help, which bullydog product is it?

dodgezilla04

you have a lag issue with a stock turbo? just wait until you put a bigger hairdryer on it.

omaharam

Left foot on brake.
Press and hold.
Right foot on throttle.
Press and hold.
After a second or two, release left foot.

No more turbo lag.

banshee

Not a good idea unless setup right, but if you're wanting insta-spool...