What rear end gear oil/stabilizer/modifier for a Track-Lok
#1
Banned
Thread Starter
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 2,997
Likes: 0
Received 0 Likes
on
0 Posts
What rear end gear oil/stabilizer/modifier for a Track-Lok
I rebuilt my D80 Track-lok a few weeks ago after wiping the spider gears, and the guy who helped me out restacked the clutches so it would be as close to a locking rear as I could get for now.
it works great, both tires grab HARD, but when making turns im getting a noticable noise especially when in reverse(clicking, and feel it grinding) , and i am afraid it might not be normal.
gonna change out the generic 80-90 with LSD friction modifier in there now, go to a better fluid and see if the noise goes away as well as i can inspect it while i have it open anyway.
what would you guys recommend?
it works great, both tires grab HARD, but when making turns im getting a noticable noise especially when in reverse(clicking, and feel it grinding) , and i am afraid it might not be normal.
gonna change out the generic 80-90 with LSD friction modifier in there now, go to a better fluid and see if the noise goes away as well as i can inspect it while i have it open anyway.
what would you guys recommend?
#2
Registered User
Join Date: Mar 2006
Location: Eastern Shore of Maryland
Posts: 1,140
Likes: 0
Received 0 Likes
on
0 Posts
Mine did the same thing shounded horrible, i ran synthetic 80-90 and just added about 1/3 of a little bottle of friction modifyer from the dodge dealer. Bout $8 got rid of the....kink kink kink noise you hear when turning at idle speeds. Both still grab hard under power
Thread
Thread Starter
Forum
Replies
Last Post
Bruce1
3rd Generation Ram - Non Drivetrain - All Years
7
03-23-2010 07:31 AM
SkyHarborCowboy
24 Valve Engine and Drivetrain
14
04-23-2009 01:01 PM
fredbert
3rd Gen Engine and Drivetrain -> 2003-2007
6
02-23-2008 03:23 PM